Sign making with the UCCNC

If you milled something cool and you want to show it to others post it here.

Sign making with the UCCNC

Postby StoneyCNC » Wed Aug 13, 2014 11:17 pm

We've been testing the UCCNC hard over the past few months and here are some signs from recent final tests on the new release. The GUI is very user friendly and we are very excited about moving to the UCCNC for all our machines.

Image

See here https://www.flickr.com/photos/98796556@N04/sets/72157646399382132/ for some more images like the one you see.


All the toolpaths were generated in VcarvePro and exported using the Mach2/3 arcs mm post processor and imported straight into the UCCNC software
StoneyCNC
 
Posts: 10
Joined: Wed Aug 13, 2014 10:45 pm

Re: Sign making with the UCCNC

Postby cncdrive » Thu Aug 14, 2014 10:40 pm

The sign looks good Rory, thanks for posting. :D
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 5 guests