Testing adaptive and engrave with rigid tap etc from fusion

If you milled something cool and you want to show it to others post it here.

Testing adaptive and engrave with rigid tap etc from fusion

Postby Battwell » Mon Mar 18, 2019 11:27 pm

82BB9F49-EE7C-4564-BAD1-633E20178436.jpeg
Test piece
My first test post out of fusion 360 on my mill
Uc300eth on router and mill
If they say it can't be done- I find a way!
Battwell
 
Posts: 501
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk

Re: Testing adaptive and engrave with rigid tap etc from fus

Postby spumco » Tue Mar 19, 2019 9:02 pm

Swank. Well done.

FYI - Engraving - I've been successful by running a second pass at the same depth. Smoothes out the tool marks and takes the top burr off most of the time. Not sure I'd try it in something hard, but in brass & aluminum the engraver doesn't seem to dull despite what is probably a 'rubbing' pass.

20181110_213246.jpg
spumco
 
Posts: 264
Joined: Mon Oct 03, 2016 10:10 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 1 guest

cron