Some works with 4th axis.

If you milled something cool and you want to show it to others post it here.

Some works with 4th axis.

Postby Ivan Ionov » Wed Oct 05, 2016 8:29 am

https://www.youtube.com/watch?v=MLaJCFJQopE
I've generated several 3axis toolpath with Vectric Vcarve, and then combined them into one NC file as a subprograms like "do subprogram 1 at angles 0, 60, 120, rotate to A90 and do subprogram 2".

Timing pulley -
https://www.youtube.com/watch?v=z8ntlwbD4GA
Large thin gear -
https://www.youtube.com/watch?v=7DbTRjk8F2Y
Both are milled with manually written NC file (some variables, run subprogram N times for every tooth... )
Attachments
IMG_7665n.JPG
IMG_0174n.JPG
Ivan Ionov
 
Posts: 15
Joined: Tue Sep 20, 2016 9:33 pm

Re: Some works with 4th axis.

Postby camivic » Fri Dec 09, 2016 8:07 pm

Great job!!!
camivic
 
Posts: 10
Joined: Thu Dec 08, 2016 10:32 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 2 guests

cron