My Machine now with UCCNC

If you milled something cool and you want to show it to others post it here.

My Machine now with UCCNC

Postby Mallemann » Sun Apr 01, 2018 2:45 pm

Now using UCCNC, very good first impression!

I enhanced my Hobby DIY Machine with a new Controller, Based on the UC300ETH Board on the UB1 Motherboard.

For Details on the Machine check out http://www.masdrive.ch/myprojects/?page_id=381

The New Controller here: http://www.masdrive.ch/myprojects/?page_id=502

some UCCNC Impressions from a Part milling with a spiral morph strategy (forces all 3 Axes to move Simultan)
http://www.masdrive.ch/myprojects/?attachment_id=561
http://www.masdrive.ch/myprojects/?attachment_id=560
Mallemann
 
Posts: 13
Joined: Sat Mar 24, 2018 8:50 pm

Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 5 guests