3500x2200mm CNC Build with UCCNC

If you milled something cool and you want to show it to others post it here.

Re: 3500x2200mm CNC Build with UCCNC

Postby dezsoe » Mon May 25, 2020 5:17 pm

You can connect buttons to inputs and set them as input triggers to activate buttons like Cycle start. It is also possible to automate the startup, however I do not recommend it, because it is unsafe to start movements without user interaction.
dezsoe
 
Posts: 1146
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: 3500x2200mm CNC Build with UCCNC

Postby RRocadas » Mon May 25, 2020 7:50 pm

dezsoe wrote:You can connect buttons to inputs and set them as input triggers to activate buttons like Cycle start. It is also possible to automate the startup, however I do not recommend it, because it is unsafe to start movements without user interaction.


Ok thank you.
I have passed from grbl to UCCNC and it's amazing all possibilities!!!
So i can wire a button for example to a isolated input I4+ and power input 24v+ and tell in uccnc interface that Pin I4 is to cycle start?
thank you very much for the help
RRocadas
 
Posts: 11
Joined: Wed May 06, 2020 8:23 am

Re: 3500x2200mm CNC Build with UCCNC

Postby dezsoe » Mon May 25, 2020 9:16 pm

Yes, exactly.
dezsoe
 
Posts: 1146
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: 3500x2200mm CNC Build with UCCNC

Postby RRocadas » Mon May 25, 2020 10:42 pm

dezsoe wrote:Yes, exactly.


Thank you very much.
RRocadas
 
Posts: 11
Joined: Wed May 06, 2020 8:23 am

Re: 3500x2200mm CNC Build with UCCNC

Postby RRocadas » Mon May 25, 2020 11:25 pm

Here one of the test's at 10000mm/min
Attachments

[ Play Quicktime file ] 10000mm-min_Cut.mp4 [ 1.97 MiB | Viewed 642 times ]

RRocadas
 
Posts: 11
Joined: Wed May 06, 2020 8:23 am

Re: 3500x2200mm CNC Build with UCCNC

Postby RRocadas » Fri May 29, 2020 11:41 am

Z axis to start.
Attachments
Z-Azis.jpeg
RRocadas
 
Posts: 11
Joined: Wed May 06, 2020 8:23 am

Re: 3500x2200mm CNC Build with UCCNC

Postby RRocadas » Mon Jun 22, 2020 7:35 pm

Just came back with ore time and i'm finishing z axis now.
Zaxis_mounted.jpg
RRocadas
 
Posts: 11
Joined: Wed May 06, 2020 8:23 am

Previous

Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 1 guest