Laser cut.

If you milled something cool and you want to show it to others post it here.

Laser cut.

Postby Tweakie.CNC » Thu Sep 05, 2019 8:34 am

I had to laser cut a few more of these easy plug removers and just a note for any Mach3 laser users considering moving to UCCNC – the function of the M10 and M11 commands are reversed.
With UCCNC the M10 turns the laser ON and M11 turns it OFF (consistent with axis movement). The other main difference is that with UCCNC the Output Pin# is specified in the setup and does not need to be included within the Gcode.

For any that may be interested I have attached my Vectric UCCNC Laser mm Post Processor.

Tweakie.
Attachments
UCCNC_Laser_mm.rar
(1.02 KiB) Downloaded 8 times
DSC02028a.JPG
DSC02029a.JPG
DSC02031a.JPG
DSC02033a.JPG
DSC02034a.JPG
User avatar
Tweakie.CNC
 
Posts: 24
Joined: Wed Jul 31, 2019 7:58 am
Location: London UK

Re: Laser cut.

Postby Tweakie.CNC » Thu Sep 19, 2019 10:31 am

I gave a couple of my jukebox 45’s to a friend – could we find any ‘spiders’, could we heck. It’s probably totally uneconomic to do but we decided to laser cut a couple rather than wait for an ebay delivery.
These homemade spiders do not have the edge lip to hold them securely in place so 3 tiny dots of superglue were necessary but nonetheless they do the job well.

Tweakie.
Attachments
DSC02330a.JPG
User avatar
Tweakie.CNC
 
Posts: 24
Joined: Wed Jul 31, 2019 7:58 am
Location: London UK

Re: Laser cut.

Postby cncdrive » Thu Sep 19, 2019 2:38 pm

That's nice. Good to have a laser CNC at hands isn't it. :)
cncdrive
Site Admin
 
Posts: 2957
Joined: Tue Aug 12, 2014 11:17 pm


Return to What you've made with your machine post the pictures, videos here

Who is online

Users browsing this forum: No registered users and 1 guest