forum.cncdrive.com

Hi, building a plasma table with a THC.
I'm not sure about the input requirements.
I'll be using a Eth300 with a UCBB and I'm wondering what I can input.
My THC puts out 24vdc on the Arc ok, up and down signals. Can I connect directly or do I need a relay dry contacts?
About to 3d print some parts and want to know if I should include space for relays or not.
Thanks

@cncdrive
Any help here?

Yes, you can input 24 Volts signals to the UCBB inputs, there is no need for relays.

Thanks