by Makingtoothpicks » Sun May 19, 2024 7:04 pm
My problem is that recently my Z axis is moving in the wrong direction when I run home all. I look at the axis control window and do not see anything that looks like it changed. I change the direction and save. The machine now homes to the correct place. I then go back and change the setting back and it homes to the correct place. when I run a gcode the z is supposed to run at .02 but it runs at .499. Here are some screen shots and gcode . I hope this can be worked out.
- Attachments
-
![thumbnail_image1.jpg (556.08 KiB) Viewed 561 times thumbnail_image1.jpg](./download/file.php?id=4886&t=1&sid=8329373d7aa78a8d5f83fd3ffdc6f2fa)
-
![thumbnail_image0.jpg (833.21 KiB) Viewed 561 times thumbnail_image0.jpg](./download/file.php?id=4885&t=1&sid=8329373d7aa78a8d5f83fd3ffdc6f2fa)