uc400 problem

[alfre]

good evening, I have a problem with my uc400eth. When I launch the Gcode into mach3 after 3 line it is stopping in G21 command and and does not exceed while the elapsed time procceds. So to continue my work I must turn off mach and restart. If I try all this without plugins I have no problem.
What could it be? thanks to those who can suggest me

[ger21]

G21 is an unsupported code. In the settings, is an option on how to handle non interpretable codes. You probably want to have that set to ignore them.

[ger21]

Probably should read better.

[cncdrive]

I think G20/21 is handled by Mach3 itself without doing anything with the plugin, but to make sure I will ask my mach3 plugin developer collegue tomorrow.
If I'm right then it will be a Mach3 bug not a plugin problem. Will let you know tomorrow after getting information from my collegue.

[cncdrive]

And one question: Which Mach3 and UC400ETH plugin version are you using?
I would like to test some G20/G21 codes to see what the problem is and want to test with the same version as you using to possibly reproduce the issue on my system.

[alfre]

hi, thanx for reply. I'm using mach3 Version R3.043.066 and version V1_012 for plugin. When mach3 runs without plugin does not give me no lockout.

[alfre]

this is a process that freezes

(T4 D=5. CR=0. - ZMIN=-5. - FLAT END MILL)
G90 G94 G91.1 G40 G49 G17
G21
G28 G91 Z0.
G90

(2 TRIANGOLI 5MM)
M5
M9
T4 M6
S8000 M3
G54
M9
G0 X66.853 Y19.647
G43 Z6. H4
Z3.
G1 Z-1.5 F25.
X66.86 Y19.648 Z-1.587
X66.883 Z-1.671
X66.92 Y19.649 Z-1.75
X66.97 Y19.65 Z-1.821
X67.031 Y19.652 Z-1.883
X67.102 Y19.654 Z-1.933
X67.181 Y19.655 Z-1.97
X67.266 Y19.658 Z-1.992
X67.352 Y19.66 Z-2.
X67.852 Y19.672 F200.
G3 X68.34 Y20.184 R0.5
X53.344 Y19.816 R7.5
X68.34 Y20.184 R7.5
X67.828 Y20.672 R0.5
G1 X67.328 Y20.659
X67.241 Y20.657 Z-1.992
X67.157 Y20.655 Z-1.97
X67.078 Y20.653 Z-1.933
X67.007 Y20.651 Z-1.883
X66.945 Y20.65 Z-1.821
X66.895 Y20.649 Z-1.75
X66.858 Y20.648 Z-1.671
X66.836 Y20.647 Z-1.587
X66.828 Z-1.5
X66.853 Y19.647
Z-3.5 F25.
X66.86 Y19.648 Z-3.587
X66.883 Z-3.671
X66.92 Y19.649 Z-3.75
X66.97 Y19.65 Z-3.821
X67.031 Y19.652 Z-3.883
X67.102 Y19.654 Z-3.933
X67.181 Y19.655 Z-3.97
X67.266 Y19.658 Z-3.992
X67.352 Y19.66 Z-4.
X67.852 Y19.672 F200.
G3 X68.34 Y20.184 R0.5
X53.344 Y19.816 R7.5
X68.34 Y20.184 R7.5
X67.828 Y20.672 R0.5
G1 X67.328 Y20.659
X67.241 Y20.657 Z-3.992
X67.157 Y20.655 Z-3.97
X67.078 Y20.653 Z-3.933
X67.007 Y20.651 Z-3.883
X66.945 Y20.65 Z-3.821
X66.895 Y20.649 Z-3.75
X66.858 Y20.648 Z-3.671
X66.836 Y20.647 Z-3.587
X66.828 Z-3.5
X66.853 Y19.647
Z-4.5 F25.
X66.86 Y19.648 Z-4.587
X66.883 Z-4.671
X66.92 Y19.649 Z-4.75
X66.97 Y19.65 Z-4.821
X67.031 Y19.652 Z-4.883
X67.102 Y19.654 Z-4.933
X67.181 Y19.655 Z-4.97
X67.266 Y19.658 Z-4.992
X67.352 Y19.66 Z-5.
X67.852 Y19.672 F200.
G3 X68.34 Y20.184 R0.5
X53.344 Y19.816 R7.5
X68.34 Y20.184 R7.5
X67.828 Y20.672 R0.5
G1 X67.328 Y20.659
X67.241 Y20.657 Z-4.992
X67.157 Y20.655 Z-4.97
X67.078 Y20.653 Z-4.933
X67.007 Y20.651 Z-4.883
X66.945 Y20.65 Z-4.821
X66.895 Y20.649 Z-4.75
X66.858 Y20.648 Z-4.671
X66.836 Y20.647 Z-4.587
X66.828 Z-4.5
G0 Z3.
X80.722 Y38.018
G1 Z-1.5 F25.
X80.727 Y38.024 Z-1.587
X80.739 Y38.043 Z-1.671
X80.76 Y38.073 Z-1.75
X80.788 Y38.115 Z-1.821
X80.823 Y38.166 Z-1.883
X80.863 Y38.225 Z-1.933
X80.907 Y38.29 Z-1.97
X80.954 Y38.36 Z-1.992
X81.003 Y38.432 Z-2.
X81.284 Y38.845 F200.
G3 X81.151 Y39.54 R0.5
G1 X79.606 Y40.589
G3 X78.838 Y40.288 R0.5
G1 X77.778 Y35.7
G3 X78.504 Y35.148 R0.5
G1 X82.848 Y37.506
G3 X82.89 Y38.359 R0.5
G1 X81.151 Y39.54
G3 X80.457 Y39.407 R0.5
G1 X80.176 Y38.993
X80.127 Y38.922 Z-1.992
X80.08 Y38.852 Z-1.97
X80.035 Y38.787 Z-1.933
X79.995 Y38.727 Z-1.883
X79.961 Y38.676 Z-1.821
X79.933 Y38.635 Z-1.75
X79.912 Y38.605 Z-1.671
X79.899 Y38.586 Z-1.587
X79.895 Y38.58 Z-1.5
X80.722 Y38.018
Z-3.5 F25.
X80.727 Y38.024 Z-3.587
X80.739 Y38.043 Z-3.671
X80.76 Y38.073 Z-3.75
X80.788 Y38.115 Z-3.821
X80.823 Y38.166 Z-3.883
X80.863 Y38.225 Z-3.933
X80.907 Y38.29 Z-3.97
X80.954 Y38.36 Z-3.992
X81.003 Y38.432 Z-4.
X81.284 Y38.845 F200.
G3 X81.151 Y39.54 R0.5
G1 X79.606 Y40.589
G3 X78.838 Y40.288 R0.5
G1 X77.778 Y35.7
G3 X78.504 Y35.148 R0.5
G1 X82.848 Y37.506
G3 X82.89 Y38.359 R0.5
G1 X81.151 Y39.54
G3 X80.457 Y39.407 R0.5
G1 X80.176 Y38.993
X80.127 Y38.922 Z-3.992
X80.08 Y38.852 Z-3.97
X80.035 Y38.787 Z-3.933
X79.995 Y38.727 Z-3.883
X79.961 Y38.676 Z-3.821
X79.933 Y38.635 Z-3.75
X79.912 Y38.605 Z-3.671
X79.899 Y38.586 Z-3.587
X79.895 Y38.58 Z-3.5
X80.722 Y38.018
Z-4.5 F25.
X80.727 Y38.024 Z-4.587
X80.739 Y38.043 Z-4.671
X80.76 Y38.073 Z-4.75
X80.788 Y38.115 Z-4.821
X80.823 Y38.166 Z-4.883
X80.863 Y38.225 Z-4.933
X80.907 Y38.29 Z-4.97
X80.954 Y38.36 Z-4.992
X81.003 Y38.432 Z-5.
X81.284 Y38.845 F200.
G3 X81.151 Y39.54 R0.5
G1 X79.606 Y40.589
G3 X78.838 Y40.288 R0.5
G1 X77.778 Y35.7
G3 X78.504 Y35.148 R0.5
G1 X82.848 Y37.506
G3 X82.89 Y38.359 R0.5
G1 X81.151 Y39.54
G3 X80.457 Y39.407 R0.5
G1 X80.176 Y38.993
X80.127 Y38.922 Z-4.992
X80.08 Y38.852 Z-4.97
X80.035 Y38.787 Z-4.933
X79.995 Y38.727 Z-4.883
X79.961 Y38.676 Z-4.821
X79.933 Y38.635 Z-4.75
X79.912 Y38.605 Z-4.671
X79.899 Y38.586 Z-4.587
X79.895 Y38.58 Z-4.5
G0 Z3.
X60.775 Y46.418
G1 Z-1.5 F25.
X60.782 Y46.415 Z-1.587
X60.802 Y46.405 Z-1.671
X60.835 Y46.388 Z-1.75
X60.88 Y46.366 Z-1.821
X60.935 Y46.339 Z-1.883
X60.999 Y46.307 Z-1.933
X61.069 Y46.272 Z-1.97
X61.145 Y46.234 Z-1.992
X61.222 Y46.196 Z-2.
X61.67 Y45.973 F200.
G3 X62.341 Y46.198 R0.5
G1 X63.184 Y47.894
G3 X62.736 Y48.617 R0.5
G1 X58.948
G3 X58.5 Y47.894 R0.5
G1 X60.394 Y44.085
G3 X61.29 R0.5
G1 X62.341 Y46.198
G3 X62.115 Y46.868 R0.5
G1 X61.668 Y47.091
X61.59 Y47.13 Z-1.992
X61.515 Y47.167 Z-1.97
X61.444 Y47.202 Z-1.933
X61.38 Y47.234 Z-1.883
X61.325 Y47.262 Z-1.821
X61.28 Y47.284 Z-1.75
X61.247 Y47.3 Z-1.671
X61.227 Y47.31 Z-1.587
X61.22 Y47.314 Z-1.5
X60.775 Y46.418
Z-3.5 F25.
X60.782 Y46.415 Z-3.587
X60.802 Y46.405 Z-3.671
X60.835 Y46.388 Z-3.75
X60.88 Y46.366 Z-3.821
X60.935 Y46.339 Z-3.883
X60.999 Y46.307 Z-3.933
X61.069 Y46.272 Z-3.97
X61.145 Y46.234 Z-3.992
X61.222 Y46.196 Z-4.
X61.67 Y45.973 F200.
G3 X62.341 Y46.198 R0.5
G1 X63.184 Y47.894
G3 X62.736 Y48.617 R0.5
G1 X58.948
G3 X58.5 Y47.894 R0.5
G1 X60.394 Y44.085
G3 X61.29 R0.5
G1 X62.341 Y46.198
G3 X62.115 Y46.868 R0.5
G1 X61.668 Y47.091
X61.59 Y47.13 Z-3.992
X61.515 Y47.167 Z-3.97
X61.444 Y47.202 Z-3.933
X61.38 Y47.234 Z-3.883
X61.325 Y47.262 Z-3.821
X61.28 Y47.284 Z-3.75
X61.247 Y47.3 Z-3.671
X61.227 Y47.31 Z-3.587
X61.22 Y47.314 Z-3.5
X60.775 Y46.418
Z-4.5 F25.
X60.782 Y46.415 Z-4.587
X60.802 Y46.405 Z-4.671
X60.835 Y46.388 Z-4.75
X60.88 Y46.366 Z-4.821
X60.935 Y46.339 Z-4.883
X60.999 Y46.307 Z-4.933
X61.069 Y46.272 Z-4.97
X61.145 Y46.234 Z-4.992
X61.222 Y46.196 Z-5.
X61.67 Y45.973 F200.
G3 X62.341 Y46.198 R0.5
G1 X63.184 Y47.894
G3 X62.736 Y48.617 R0.5
G1 X58.948
G3 X58.5 Y47.894 R0.5
G1 X60.394 Y44.085
G3 X61.29 R0.5
G1 X62.341 Y46.198
G3 X62.115 Y46.868 R0.5
G1 X61.668 Y47.091
X61.59 Y47.13 Z-4.992
X61.515 Y47.167 Z-4.97
X61.444 Y47.202 Z-4.933
X61.38 Y47.234 Z-4.883
X61.325 Y47.262 Z-4.821
X61.28 Y47.284 Z-4.75
X61.247 Y47.3 Z-4.671
X61.227 Y47.31 Z-4.587
X61.22 Y47.314 Z-4.5
G0 Z3.
X41.918 Y37.643
G1 Z-1.5 F25.
X41.925 Y37.645 Z-1.587
X41.947 Y37.65 Z-1.671
X41.983 Y37.658 Z-1.75
X42.032 Y37.67 Z-1.821
X42.092 Y37.684 Z-1.883
X42.161 Y37.7 Z-1.933
X42.238 Y37.717 Z-1.97
X42.32 Y37.736 Z-1.992
X42.405 Y37.756 Z-2.
X42.892 Y37.868 F200.
G3 X43.267 Y38.468 R0.5
G1 X42.846 Y40.288
G3 X42.078 Y40.589 R0.5
G1 X38.794 Y38.359
G3 X38.837 Y37.506 R0.5
G1 X43.181 Y35.148
G3 X43.906 Y35.7 R0.5
G1 X43.267 Y38.468
G3 X42.667 Y38.843 R0.5
G1 X42.18 Y38.73
X42.095 Y38.711 Z-1.992
X42.013 Y38.692 Z-1.97
X41.936 Y38.674 Z-1.933
X41.866 Y38.658 Z-1.883
X41.806 Y38.644 Z-1.821
X41.758 Y38.633 Z-1.75
X41.722 Y38.624 Z-1.671
X41.7 Y38.619 Z-1.587
X41.692 Y38.618 Z-1.5
X41.918 Y37.643
Z-3.5 F25.
X41.925 Y37.645 Z-3.587
X41.947 Y37.65 Z-3.671
X41.983 Y37.658 Z-3.75
X42.032 Y37.67 Z-3.821
X42.092 Y37.684 Z-3.883
X42.161 Y37.7 Z-3.933
X42.238 Y37.717 Z-3.97
X42.32 Y37.736 Z-3.992
X42.405 Y37.756 Z-4.
X42.892 Y37.868 F200.
G3 X43.267 Y38.468 R0.5
G1 X42.846 Y40.288
G3 X42.078 Y40.589 R0.5
G1 X38.794 Y38.359
G3 X38.837 Y37.506 R0.5
G1 X43.181 Y35.148
G3 X43.906 Y35.7 R0.5
G1 X43.267 Y38.468
G3 X42.667 Y38.843 R0.5
G1 X42.18 Y38.73
X42.095 Y38.711 Z-3.992
X42.013 Y38.692 Z-3.97
X41.936 Y38.674 Z-3.933
X41.866 Y38.658 Z-3.883
X41.806 Y38.644 Z-3.821
X41.758 Y38.633 Z-3.75
X41.722 Y38.624 Z-3.671
X41.7 Y38.619 Z-3.587
X41.692 Y38.618 Z-3.5
X41.918 Y37.643
Z-4.5 F25.
X41.925 Y37.645 Z-4.587
X41.947 Y37.65 Z-4.671
X41.983 Y37.658 Z-4.75
X42.032 Y37.67 Z-4.821
X42.092 Y37.684 Z-4.883
X42.161 Y37.7 Z-4.933
X42.238 Y37.717 Z-4.97
X42.32 Y37.736 Z-4.992
X42.405 Y37.756 Z-5.
X42.892 Y37.868 F200.
G3 X43.267 Y38.468 R0.5
G1 X42.846 Y40.288
G3 X42.078 Y40.589 R0.5
G1 X38.794 Y38.359
G3 X38.837 Y37.506 R0.5
G1 X43.181 Y35.148
G3 X43.906 Y35.7 R0.5
G1 X43.267 Y38.468
G3 X42.667 Y38.843 R0.5
G1 X42.18 Y38.73
X42.095 Y38.711 Z-4.992
X42.013 Y38.692 Z-4.97
X41.936 Y38.674 Z-4.933
X41.866 Y38.658 Z-4.883
X41.806 Y38.644 Z-4.821
X41.758 Y38.633 Z-4.75
X41.722 Y38.624 Z-4.671
X41.7 Y38.619 Z-4.587
X41.692 Y38.618 Z-4.5
G0 Z6.

M9
G28 G91 Z0.
G28 X0. Y0.
M30

[ger21]

hi, thanx for reply. I'm using mach3 Version R3.043.066 and version V1_012 for plugin. When mach3 runs without plugin does not give me no lockout.

Do not use Mach3 3.043.066, as it's very buggy. Get 3.043.062 from the FTP site.

[CT63]

Don't use Mach 3, .066 it's very buggy with known problems. Last stable (less buggy) version is .062. Better yet is go with UCCNC and ditch Mach 3.

[alfre]

ok thanx , I will try'