Page 1 of 1

Tool table ????

PostPosted: Mon Sep 18, 2023 11:02 am
by kig23
Hi,
i'm using uccnc version 1.2115. How the Tools 1-48 and Tools 49-96 tabs are related to the Tool table - detailed window. There is nothing in the use manual.

Re: Tool table ????

PostPosted: Mon Sep 18, 2023 11:45 am
by dezsoe
The data is the same. The Z offset is called "length" in the detailed table:

ToolTable.png

Re: Tool table ????

PostPosted: Mon Sep 18, 2023 1:14 pm
by kig23
Hi Dezsoe,
i see in the Neon screenset they have fields for Slot and Description. The question is how these fields are related to the Tool table - detailed? Does changing values from Tool table - detailed reflects to the Tool tab and vice versa?

Re: Tool table ????

PostPosted: Mon Sep 18, 2023 2:06 pm
by dezsoe
You can see the relation on the picture. There are no fields in UCCNC for the other parameters, they can be edited only in the details window. However, if you have a plugin or macro to read/write the details then you can place fields on the screen to edit these parameters. I don't have the Neon screenset, so I can't check how it is done.

Re: Tool table ????

PostPosted: Mon Sep 18, 2023 5:58 pm
by kig23
Thanks. I solved it with plugin