the display of the axes, does not indicate the exact distanc
![Post Post](./styles/prosilver/imageset/icon_post_target.gif)
Hi!
(PS: I'm a new user of the UCCNC software recently so maybe it's me who set it wrong or forgot to set some parameter).
My question is… Why does the axis display not show the exact distance ask?
Example: I request a displacement of 1.0mm on the axis (X),
but the display shows a displacement of 0.9998mm.
The result obtained is different depending on the axis.
1.0mm on axis (Y), display reads 1.0007
1.0mm on the (Z) axis, the display reads 0.9994.
This also happens in step mode.
If I adjust to get a 1.0mm step in the "JOG PANEL"
also the display shows the same deviation. Let (for the X axis) be 0.9998.
This discrepancy between the motion request and the result obtained, occurred after having calibrated the axes, using the automatic axis calibration function, included in this software.
I noticed that if I indicate a step per unit without decimal in the "STEP PER UNIT" box, the result is correct.
Next question...After having calibrated the axes, should we make new settings to re-calibrate the software?
(Or something else?)
thank you in advance for your help!