STEP not working

If you have a question about the software please ask it here.

STEP not working

Postby Ron Meadows » Sat Nov 26, 2022 1:48 am

I'm using a UC100 and the latest version of stable software and the STEP jog will no work in the pop out window. Continuous works just fine, but I can click on the up/down arrows until my fingers bleed in STEP mode and I get nothing. Any ideas???
Ron Meadows
 
Posts: 4
Joined: Sat Nov 26, 2022 1:45 am

Re: STEP not working

Postby dezsoe » Sat Nov 26, 2022 9:38 am

Step mode runs by the feed rate you have set by the F command. Try to set a higher feed rate.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: STEP not working

Postby Ron Meadows » Wed Dec 14, 2022 3:39 am

Problem solved by rebooting PC and software. Have found another issue posted in another question. Thanks for the reply.
Ron Meadows
 
Posts: 4
Joined: Sat Nov 26, 2022 1:45 am


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 14 guests