AXBB-E + UCCNC + Probe problem

If you have a question about the software please ask it here.

Re: AXBB-E + UCCNC + Probe problem

Postby peter_tash » Fri Oct 11, 2019 7:49 am

It does light up in the diagnostics section when i press the sensor. Bu still I gent no movement in the g31 command.
peter_tash
 
Posts: 7
Joined: Thu Oct 10, 2019 4:24 am

Re: AXBB-E + UCCNC + Probe problem

Postby peter_tash » Mon Oct 21, 2019 10:35 am

I raised the voltage of the power supply to 24 volts. It was set to 21.5V. And used another probe button that is NC not NO. That solved my problem for now. Only thing that bothers me is that when I stop the electricity of the machine the spindle makes a few rotations... Do not know why...
peter_tash
 
Posts: 7
Joined: Thu Oct 10, 2019 4:24 am

Previous

Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 4 guests