Fusion 360 and UCCNC cutter comp

If you have a question about the software please ask it here.

Fusion 360 and UCCNC cutter comp

Postby awschmitz7 » Tue Dec 18, 2018 9:39 pm

I searched around a bit and couldn’t find much regarding compensation type in control for the UCCNC post in fusion 360. If I try to post out using compensation type in control it won’t post giving me an error saying UCCNC doesn’t support it. Is there a update coming to the post processor for UCCNC on the autodesk site? Are their also any workarounds at the moment to get it to work using a different post processor or updating the script for UCCNC’s?
awschmitz7
 
Posts: 5
Joined: Mon May 14, 2018 7:07 pm

Re: Fusion 360 and UCCNC cutter comp

Postby cncdrive » Tue Dec 18, 2018 10:27 pm

The Fusion360 post processor is developed by Autodesk without any interaction from us, so you will have to ask them about what their post processor supports.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Fusion 360 and UCCNC cutter comp

Postby ger21 » Tue Dec 18, 2018 11:06 pm

I played around with a post a few months ago. It's in this thread. Use at your own risk, as I didn't do much testing.

viewtopic.php?f=2&t=1138
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 16 guests

cron