UCCNC 4 times slower cutting curve than straight

If you have a question about the software please ask it here.

Re: UCCNC 4 times slower cutting curve than straight

Postby ger21 » Sun Sep 09, 2018 7:14 pm

I changed gcode like you advised, but problem is that this will change the shape of the cut.


It won't if you do it right. Some sections of the code may require different editing.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: UCCNC 4 times slower cutting curve than straight

Postby Tulnukas » Sun Sep 09, 2018 7:15 pm

ger21 wrote:
I changed gcode like you advised, but problem is that this will change the shape of the cut.


It won't if you do it right. Some sections of the code may require different editing.



Ok, i just dont understand Gcode that well.
Tulnukas
 
Posts: 19
Joined: Thu Sep 06, 2018 6:28 pm

Previous

Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 28 guests

cron