DelCam 2011 Toolpaths Rejected not made

If you have a question about the software please ask it here.

DelCam 2011 Toolpaths Rejected not made

Postby ralphd3g » Thu Aug 23, 2018 7:49 pm

Howdy :D working with DelCam 2011 Toolpaths the relief toolpath works great :o but draw a vector box and try to generate a toolpath and you get
" No toolpath created for the current tool." :evil: I thought it was me putting in tools in database :mrgreen: but I selected metric tools and it does the same thing .
Anyone else run into this problem? I uninstalled and reinstalled program with the same result. What parameter is the program looking for in the tool database?
Ralphd3g
ralphd3g
 
Posts: 3
Joined: Sat Aug 18, 2018 9:55 pm

Re: DelCam 2011 Toolpaths Rejected not made

Postby cncdrive » Thu Aug 23, 2018 8:47 pm

Hi,

If I understand you correctly you using a software called DelCAM 2011 and you getting an error message in that software and it does not generate the toolpath for you?!
I think it would be better to ask your question from Delcam, because I have never used that software. If I have to be honest I have never even heard about it. And this issue has no relation to the UCCNC software.
But maybe you will have luck if any forum members here using the same software and if they can help you. Will see. :)
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: DelCam 2011 Toolpaths Rejected not made

Postby Robertspark » Thu Aug 23, 2018 10:29 pm

Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm

Re: DelCam 2011 Toolpaths Rejected not made

Postby ralphd3g » Sat Aug 25, 2018 4:22 pm

Delcam is really AutoCad 2011 sarry for the confusion. :mrgreen:
Ralph
ralphd3g
 
Posts: 3
Joined: Sat Aug 18, 2018 9:55 pm

Re: DelCam 2011 Toolpaths Rejected not made

Postby ralphd3g » Sat Aug 25, 2018 4:28 pm

ralphd3g wrote:Howdy :D working with AutoCad 2011 Toolpaths the relief toolpath works great :o but draw a vector box and try to generate a toolpath and you get
" No toolpath created for the current tool." :evil: I thought it was me putting in tools in database :mrgreen: but I selected metric tools and it does the same thing .
Anyone else run into this problem? I uninstalled and reinstalled program with the same result. What parameter is the program looking for in the tool database?
Ralphd3g
DelCam is really AutoCad. sorry for the confusion.
ralphd3g
 
Posts: 3
Joined: Sat Aug 18, 2018 9:55 pm

Re: DelCam 2011 Toolpaths Rejected not made

Postby ger21 » Sat Aug 25, 2018 5:31 pm

That's even more confusing??? :roll:
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: DelCam 2011 Toolpaths Rejected not made

Postby cncdrive » Sat Aug 25, 2018 8:41 pm

AutoCAD is a CAD program, you can make vector drawings, it is not a CAM program.
Maybe it has a CAM module or something, but I've never heard of it.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm


Return to Ask a question from support here

Who is online

Users browsing this forum: No registered users and 5 guests