Re: Sending a keypress to UCCNC
Posted: Fri Aug 10, 2018 5:09 pm
A macroloop is the same as a macro, the language is the same, but a macroloop as it's name says runs infinately so you can do/update things periodically.
UCCNC machine control software support forum
http://forum.cncdrive.com/
AS3.Setfield(0, 232);
AS3.Validatefield(232);
jvalencia wrote:Hello admin. What's the limitation that stops running a macro when the cycle is active?
I have this simple macro attached to a hotkey and it works, but not when a cycle is running.
M20000.txt
- Code: Select all
AS3.Setfield(0, 232);
AS3.Validatefield(232);
jvalencia wrote:I gave modbus another chance and now it's working. Last time I had problems with it but for now it works.
Let me cross my fingers...
This is the control box btw. It has Cycle Start (green), Feed override (potentiometer, 0-100%) and Reset.