Page 3 of 3

Re: Custom screens/Touchscreens

PostPosted: Sun Jun 17, 2018 9:23 pm
by Dan911
ooops... I forgot a decimal place... I did test but only with whole numbers... lol

GCK2.JPG



Gcode KeyBoard2.zip
(12.32 KiB) Downloaded 668 times

Re: Custom screens/Touchscreens

PostPosted: Sun Jun 17, 2018 9:48 pm
by Mario Soto
I could have had them just round off all numbers to even inches. :D

Re: Custom screens/Touchscreens

PostPosted: Sun Jun 17, 2018 9:54 pm
by Mario Soto
Thanks for all the help. Especially on Sunday. I can use all the info on future screens. And I can have them finished by tomorrow. I'm sure Elon will love them. :D

Re: Custom screens/Touchscreens

PostPosted: Sat Jun 23, 2018 4:50 pm
by Mario Soto
All right "groove guys" (get it?)
The screens turned out very nice. Now all I need is a macro that will activate button 129 on the screen when I press a mechanical button.
So instead of running the whole program, it will run one blk at a time each press.
Any ideas?
Thanks in advance.
Mario

Re: Custom screens/Touchscreens

PostPosted: Sat Jun 23, 2018 5:40 pm
by dezsoe
What does a "mechanical button" mean? Is it a key on the keyboard, or is it an external switch? Keys can be set to activate buttons on the Hotkeys screen, and external switches on the Input trigger screen.

And one more thing, Mario, OSK will know the MDI input in some days. I'll ask you (and anybody else) to run some tests when it will be ready to release.

osk.png

Re: Custom screens/Touchscreens

PostPosted: Sun Jun 24, 2018 1:26 pm
by Mario Soto
I can test your keyboard with a touchscreen if you'd like. The switch is external, like a limit switch.
Thank you.

Re: Custom screens/Touchscreens

PostPosted: Sun Jun 24, 2018 9:43 pm
by dezsoe
OK, connect your switch to any input and GND on your motion controller. You can check on the Diagnostics screen if your switch works (and also you can find the input). Go to Input triggers and set this port and pin to function 129. If function works only when you release the button, then check Active low.

Re: Custom screens/Touchscreens

PostPosted: Mon Jun 25, 2018 4:30 pm
by Mario Soto
I'd prefer the GCode keyboard by Dan911 for touchscreen because it has only keys I need. But that's just me.