Jumper Position

If you have a question about the software please ask it here.

Jumper Position

Postby Zadig » Mon Apr 30, 2018 7:43 am

On the UC300ETH-5LPT there is a jumper just above the 5v input socket. Can someone tell me what this jumper does and what position the jumpers should be in for an external 5v supply. My board was shipped with the jumper in a different position from some of the diagrams in the manual. I've looked for clarification both on the forum and in the manuals, but I seem to have missed them. Thanks.

Mike
Zadig
 
Posts: 17
Joined: Tue Aug 29, 2017 9:17 pm
Location: UK

Re: Jumper Position

Postby dezsoe » Mon Apr 30, 2018 8:23 am

Use the 2-3 position for UC300ETH. (The 5LPT card can be used with USB UC300 core and then you may get power from the USB port with 1-2 position.)
dezsoe
 
Posts: 544
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Jumper Position

Postby Zadig » Mon Apr 30, 2018 9:06 am

Thanks for the fast reply, just what I needed.

Again thanks,

Mike
Zadig
 
Posts: 17
Joined: Tue Aug 29, 2017 9:17 pm
Location: UK


Return to Ask a question from support here

Who is online

Users browsing this forum: Google [Bot] and 10 guests