Hallo
I have converted an Deckel FP3NC to UCCNC och it works so far good.
Did an update to version 2117.
I made me habby that you are able to do a Probe Offset.
I tried to put a number in the Probe-Setings but nothing happend.
How do I activate the offset?
Probe offset
4 posts
• Page 1 of 1
Re: Probe offset
by ger21 » Tue Jan 14, 2025 8:37 pm
Did you hit the ENTER key after entering the number?
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
- ger21
- Posts: 2730
- Joined: Sat Sep 03, 2016 2:17 am
Re: Probe offset
by Clas » Tue Jan 14, 2025 9:02 pm
Hallo Thanks for answear.
Yes I did.
I just took a number (1) for test it. And the numbers stay in the box. tried to save and uoload also.
Yes I did.
I just took a number (1) for test it. And the numbers stay in the box. tried to save and uoload also.
- Attachments
-
- Clas
- Posts: 2
- Joined: Tue Jan 14, 2025 4:01 pm
Re: Probe offset
by cncdrive » Thu Jan 16, 2025 3:21 pm
You have to select the Offset probe toggle button to enable the offset.
- cncdrive
- Site Admin
- Posts: 4997
- Joined: Tue Aug 12, 2014 11:17 pm
4 posts
• Page 1 of 1
Return to Ask a question from support here
Who is online
Users browsing this forum: Google [Bot] and 3 guests