toolpath UCS arrows (minor issue)

If you think you've found a bug post it here.

toolpath UCS arrows (minor issue)

Postby Robertspark » Fri Oct 27, 2017 4:57 pm

Would it be possible to have the Toolpath show the X,Y & Z arrows on each of the views correctly?

139 Toolpathview45 Sets the toolpath to a 45° look viewing mode.
140 Toolpathviewright vSets the toolpath to a right side look viewing mode.
141 Toolpathviewleft vSets the toolpath to a left side look viewing mode.
142 Toolpathviewtop vSets the toolpath to a top side look viewing mode.
143 ToolpathviewISO Sets the toolpath to Isometric viewing
Attachments
toolpath - Button 141.png
Button # 141
toolpath - Button 141.png (2.24 KiB) Viewed 1021 times
toolpath - Button 140.png
Button # 140
toolpath - Button 140.png (2.93 KiB) Viewed 1021 times
toolpath - Button 139.png
Button # 139
toolpath - Button 139.png (2.02 KiB) Viewed 1021 times
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2106, Neuron Lite
UCCNC v1.2105 Macro Manual
Robertspark
 
Posts: 1082
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: toolpath UCS arrows (minor issue)

Postby Robertspark » Fri Oct 27, 2017 4:59 pm

I noticed it after changing the toolpath for lathe X + Z, view / button # 141

142 & 143 look fine, its the others that look a bit difficult to read
Attachments
toolpath - Button 143.png
Button # 143
toolpath - Button 143.png (2.29 KiB) Viewed 1019 times
toolpath - Button 142.png
Button# 142
toolpath - Button 142.png (2.62 KiB) Viewed 1019 times
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2106, Neuron Lite
UCCNC v1.2105 Macro Manual
Robertspark
 
Posts: 1082
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England


Return to Report a bug

Who is online

Users browsing this forum: No registered users and 4 guests

cron