V1.2116 probable PID problem

[paso]

Hi, for two years I have been using the PID with version V1.2113 and it works perfectly, I recently switched to V1.2116 using the same .pro file with this new version the PID doesn't seem to work, the spindle turns slowly regardless of the programmed speed.
Thanks for the attention

Code: Select all

[Screensetsettings]
mainscreenfilename=Default2019
splashscreen=0
[axessettingscontrolX]
Axisenabled=True
Stepportnumber=2
Steppinnumber=7
Steppinnegate=False
Dirpinnumber=8
Dirportnumber=2
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=11
Homepinnegate=False
Homedirectionpositive=True
Homeautozero=True
Homingvalue=623.5
Homingspeedup=1000
Homingspeeddown=30
Stepsperunit=1000
Velocity=2000
Acceleration=100
Softlimitpositive=781
Softlimitnegative=1
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=1
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=216
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
[axessettingscontrolY]
Axisenabled=True
Stepportnumber=2
Steppinnumber=5
Steppinnegate=False
Dirpinnumber=6
Dirportnumber=2
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=11
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=129.5
Homingspeedup=1000
Homingspeeddown=30
Stepsperunit=1000
Velocity=2000
Acceleration=100
Softlimitpositive=430.5
Softlimitnegative=1
Backlashenable=True
Backlashdistance=0.15
Slaveaxis=None
Homeportnumber=1
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=120
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
[axessettingscontrolZ]
Axisenabled=True
Stepportnumber=2
Steppinnumber=3
Steppinnegate=False
Dirpinnumber=4
Dirportnumber=2
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=11
Homepinnegate=False
Homedirectionpositive=True
Homeautozero=True
Homingvalue=278
Homingspeedup=1000
Homingspeeddown=30
Stepsperunit=1000
Velocity=2000
Acceleration=100
Softlimitpositive=415.5
Softlimitnegative=123
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=1
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=216
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
[axessettingscontrolA]
Axisenabled=False
Stepportnumber=2
Steppinnumber=1
Steppinnegate=False
Dirpinnumber=2
Dirportnumber=2
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=400
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
Dragknifeenabled=False
Dragknifestopatangle=0
Dragkniferetractatangle=0
Dragkniferetractheight=0
Dragknifemovebackfeedrate=0
Dragknifepulloutfeedrate=0
Rotaryaxis=False
Rotaryrollover=False
[axessettingscontrolB]
Axisenabled=False
Stepportnumber=0
Steppinnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
Rotaryaxis=False
Rotaryrollover=False
[axessettingscontrolC]
Axisenabled=False
Steppinnumber=0
Stepportnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
Rotaryaxis=False
Rotaryrollover=False
[Spindlesetupsettings]
IsSpindleinPWMMode=True
SpindlePWMoutpin=0
SpindlePWMoutpinnegate=False
SpindlePWMdirpin=0
SpindlePWMdirpinnegate=False
SpindlePWMfrequency=1000
SpindlePWMminpercent=1
SpindlePWMmaxpercent=100
Spindlesteppin=0
Spindlesteppinnegate=False
Spindledirpin=0
Spindledirpinnegate=False
Spindlestepsperunit=1
Spindleacceleration=200
Spindleminvelocity=89
Spindlemaxvelocity=2001
Spindlerelaysenabled=True
M3relaypin=14
M3relaypinnegate=False
M4relaypin=9
M4relaypinnegate=False
M3ondelay=1000
M3offdelay=1500
M4ondelay=1000
M4offdelay=1500
Floodmistrelaysenabled=False
M7relaypin=0
M7relaypinnegate=False
M8relaypin=0
M8relaypinnegate=False
M7ondelay=1000
M8ondelay=1000
M9delay=0
SpindlePWMoutport=0
SpindlePWMdirport=0
Spindlestepport=0
Spindledirport=0
M3relayport=2
M4relayport=2
M7relayport=0
M8relayport=0
EncoderApin=9
EncoderAport=1
EncoderBpin=10
EncoderBport=1
Encoderreversedirection=False
EncoderPPR=400
Pulleyratio1=1.72725
Pulleyminvel1=89
Pulleymaxvel1=2001
Pulleyinuse=1
Pulleyratio2=1
Pulleyminvel2=1
Pulleymaxvel2=1
Pulleyratio3=1
Pulleyminvel3=1
Pulleymaxvel3=1
Pulleyratio4=1
Pulleyminvel4=1
Pulleymaxvel4=1
Pulleyratio5=1
Pulleyminvel5=1
Pulleymaxvel5=1
Pulleyratio6=1
Pulleyminvel6=1
Pulleymaxvel6=1
Pulleyratio7=1
Pulleyminvel7=1
Pulleymaxvel7=1
Pulleyratio8=1
Pulleyminvel8=1
Pulleymaxvel8=1
Pulleyratio9=1
Pulleyminvel9=1
Pulleymaxvel9=1
Pulleyratio10=1
Pulleyminvel10=1
Pulleymaxvel10=1
Pulleyratio11=1
Pulleyminvel11=1
Pulleymaxvel11=1
Pulleyratio12=1
Pulleyminvel12=1
Pulleymaxvel12=1
Pulleyratio13=1
Pulleyminvel13=1
Pulleymaxvel13=1
Pulleyratio14=1
Pulleyminvel14=1
Pulleymaxvel14=1
Pulleyratio15=1
Pulleyminvel15=1
Pulleymaxvel15=1
Usepulleys=True
Spindlespinuptime=1
Spindlespinupdelay=1
Spindlespinuppercent=90
Enablespindlespinup=False
[Generalsettings]
Constantvelocitymode=True
Stopatangle=89
Lookaheadlines=200
Softlimitsenable=True
Homesequence1=Z
Homesequence2=X
Homesequence3=Y
Homesequence4=None
Homesequence5=None
Homesequence6=None
Linearerror=0.03
Cornerserror=0.03
USBbuffersize=0.1
POSDROsdigits=3
Doontoolchange=2
MaxLinearaddlenght=1
MaxLinearunificationlenght=2
Kernelfreq=3
SafeZ=100
G73_backoff=0.5
Maximisescreenonstartup=True
Dwellinseconds=False
Runmodewhenunknowngcode=2
Softlimitsgcodeprecheck=False
Precompilemacrosonstartup=False
Arcradiustolerance=0.1
ResetG68onfileload=False
ResetG51onfileload=False
ResetG94onfileload=False
Debounce=0
DebounceTHC=0
DebounceHome=0
DebounceProbe1=0
DebounceProbe2=0
G41G42roundjoints=True
CheckHomeonCycleStart=True
ResetDereferenceHomes=False
Mandatoryhoming=False
Startupplane=0
[IOsetupsettings]
Estoppinnumber=0
Estoppinnegate=True
Probepinnumber=12
Probepinnegate=True
Chargepumppinnumber=0
Chargepumppinnegate=False
Chargepumplasermodeon=False
Chargepumpalwayson=False
CurrentHiLopinnumber=0
CurrentHiLopinnegate=False
Indexpinnumber=15
Indexprescaler=1
THCenable=False
THConpin=0
THConpinnegate=False
THCuppin=0
THCuppinnegate=False
THCdownpin=0
THCdownpinnegate=False
THCmin=0
THCmax=10
THCfeed=1000
THCalwayson=False
THCondelay=0
Estopportnumber=0
Chargepumpportnumber=0
CurrentHiLoportnumber=0
Indexportnumber=1
Probeportnumber=1
THConport=0
THCupport=0
THCdownport=0
MPG1pinA=13
MPG1pinB=15
MPG1portA=2
MPG1portB=2
MPG1prescaler=4
MPG1filter=50
MPG1speedmultiplier=1
FROchannel=2
SROchannel=1
JROchannel=2
FROminpercent=0
FROmaxpercent=100
SROminpercent=20
SROmaxpercent=100
JROminpercent=0
JROmaxpercent=100
SPPWMchannel=2
Ana1invarnum=0
Ana2invarnum=0
Ana1outvarnum=0
Ana2outvarnum=0
MPG1attachtoJRO=False
Laseroutputpinnumber=0
Laseroutputportnumber=0
Laseroutputpinnegate=False
THCantidiveenable=False
THCantidivepercent=0
Plasmapierceheight=0
Chargepump2pinnumber=0
Chargepump2portnumber=0
Chargepump2pinnegate=False
Digitialsyncoutputpinnumber1=0
Digitialsyncoutputportnumber1=0
Digitialsyncoutputpinnegate1=False
Digitialsyncoutputpinnumber2=0
Digitialsyncoutputportnumber2=0
Digitialsyncoutputpinnegate2=False
Digitialsyncoutputpinnumber3=0
Digitialsyncoutputportnumber3=0
Digitialsyncoutputpinnegate3=False
Digitialsyncoutputpinnumber4=0
Digitialsyncoutputportnumber4=0
Digitialsyncoutputpinnegate4=False
Digitialsyncoutputpinnumber5=0
Digitialsyncoutputportnumber5=0
Digitialsyncoutputpinnegate5=False
Digitialsyncoutputpinnumber6=0
Digitialsyncoutputportnumber6=0
Digitialsyncoutputpinnegate6=False
Digitialsyncoutputpinnumber7=0
Digitialsyncoutputportnumber7=0
Digitialsyncoutputpinnegate7=False
Digitialsyncoutputpinnumber8=0
Digitialsyncoutputportnumber8=0
Digitialsyncoutputpinnegate8=False
Digitialsyncoutputpinnumber9=0
Digitialsyncoutputportnumber9=0
Digitialsyncoutputpinnegate9=False
Digitialsyncoutputpinnumber10=0
Digitialsyncoutputportnumber10=0
Digitialsyncoutputpinnegate10=False
Probepin2number=0
Probeport2number=0
Probepin2negate=False
THCdelayenable=False
THCenableoutpin=0
THCenableoutport=0
THCenableoutpinnegate=False
THCantidiveoutpin=0
THCantidiveoutport=0
THCantidiveoutpinnegate=False
THCantidownoutpin=0
THCantidownoutport=0
THCantidownoutpinnegate=False
THCantidownenable=False
Ana3invarnum=0
Ana4invarnum=0
Ana3outvarnum=0
Ana4outvarnum=0
[Appearancesetupsettings]
2DTLCmarker=True
Viewerundonepathcolor=3381759
Viewerdonepathcolor=-5374161
Viewerrapidpathcolor=16711680
ViewerTCPmarkercolor=16776960
ViewerBackgroundcolor=0
Viewerboundariescolor=16777215
GVgcodecolors=16777215
GVmcodecolors=-233
GVscodecolors=-32513
GVfcodecolors=-21931
GVbackgroundcolor=-12698050
GVactualcodecolor=-16777216
GVactualcodemidlinescolor=-16777216
GVnotinterpretedcodecolor=16711680
GVaxiswordcolor=-8323328
GVcoordinatecolor=-9250052
TCPcone=True
TCPcross=False
RotateTCPwithplaneselection=True
Showzeromark=True
Zeromarkcolor=-16711681
DROwarningcolor=-65536
rotationpointmarkcolor=-65536
Showrotationmark=True
Showtoolpathboundaries=True
Savetooltableonclosing=False
Dontresettoolpathviewonreload=False
Disabletoolpathview=False
Dontcompressimages=True
checkboxfillcolor=-4144960
tooldimscolor=-1
tooldimsaxiscolor=True
Showtoolpathdimensions=False
Highlightcolor=-1
radiusoffsetpathcolor=-13675
Showmessageonsoftlimits=True
ValidateTextfieldsonEnteronly=True
Disablejogpanelautopopup=True
ShowRcompanalysisonfileload=True
Disablevirtualmousemode=True
ShowtoolpathZzeroplate=False
ZplateXstart=0
ZplateYstart=0
ZplateXextents=100
ZplateYextents=100
ZplateZposition=0
ZplateZpositiononbottom=False
ZplatePlateOpacity=25
ZplateColor=-65536
ZplateXgrid=10
ZplateYgrid=10
ZplateGridOpacity=25
ZplateGridColor=-1
ZplateShowSoftlimits=True
ZplateSoftlimitsColor=-16711936
ZplateSoftlimitsOpacity=100
GVbasecolor=-1
GVnotinterpretedcolor=16711680
GVlinenumberscolor=-8323200
GVcommentscolor=-32704
GVgcodescolor=-65281
GVXIcolor=-3436171
GVYJcolor=-7949975
GVZKcolor=-8145438
GVAcolor=-4144960
GVBcolor=-8388353
GVCcolor=-16711681
GVMcolor=-128
GVTFScolor=-7414838
Defaultview=viewtop
Lathecenterlinecolor=-8323200
Lathecontourcolor=-8323200
Generatecontourinlatheviewmode=True
Antialiasingsamples=1
[Tooltablevalues]
TooloffsetZ0=0
TooloffsetZ1=0
TooloffsetZ2=0
TooloffsetZ3=0
TooloffsetZ4=0
TooloffsetZ5=0
TooloffsetZ6=0
TooloffsetZ7=0
TooloffsetZ8=0
TooloffsetZ9=0
TooloffsetZ10=0
TooloffsetZ11=0
TooloffsetZ12=0
TooloffsetZ13=0
TooloffsetZ14=0
TooloffsetZ15=0
TooloffsetZ16=0
TooloffsetZ17=0
TooloffsetZ18=0
TooloffsetZ19=0
TooloffsetZ20=0
TooloffsetZ21=0
TooloffsetZ22=0
TooloffsetZ23=0
TooloffsetZ24=0
TooloffsetZ25=0
TooloffsetZ26=0
TooloffsetZ27=0
TooloffsetZ28=0
TooloffsetZ29=0
TooloffsetZ30=0
TooloffsetZ31=0
TooloffsetZ32=0
TooloffsetZ33=0
TooloffsetZ34=0
TooloffsetZ35=0
TooloffsetZ36=0
TooloffsetZ37=0
TooloffsetZ38=0
TooloffsetZ39=0
TooloffsetZ40=0
TooloffsetZ41=0
TooloffsetZ42=0
TooloffsetZ43=0
TooloffsetZ44=0
TooloffsetZ45=0
TooloffsetZ46=0
TooloffsetZ47=0
TooloffsetZ48=0
TooloffsetZ49=0
TooloffsetZ50=0
TooloffsetZ51=0
TooloffsetZ52=0
TooloffsetZ53=0
TooloffsetZ54=0
TooloffsetZ55=0
TooloffsetZ56=0
TooloffsetZ57=0
TooloffsetZ58=0
TooloffsetZ59=0
TooloffsetZ60=0
TooloffsetZ61=0
TooloffsetZ62=0
TooloffsetZ63=0
TooloffsetZ64=0
TooloffsetZ65=0
TooloffsetZ66=0
TooloffsetZ67=0
TooloffsetZ68=0
TooloffsetZ69=0
TooloffsetZ70=0
TooloffsetZ71=0
TooloffsetZ72=0
TooloffsetZ73=0
TooloffsetZ74=0
TooloffsetZ75=0
TooloffsetZ76=0
TooloffsetZ77=0
TooloffsetZ78=0
TooloffsetZ79=0
TooloffsetZ80=0
TooloffsetZ81=0
TooloffsetZ82=0
TooloffsetZ83=0
TooloffsetZ84=0
TooloffsetZ85=0
TooloffsetZ86=0
TooloffsetZ87=0
TooloffsetZ88=0
TooloffsetZ89=0
TooloffsetZ90=0
TooloffsetZ91=0
TooloffsetZ92=0
TooloffsetZ93=0
TooloffsetZ94=0
TooloffsetZ95=0
TooloffsetZ96=0
ToolDia0=0
ToolDia1=10
ToolDia2=0
ToolDia3=0
ToolDia4=0
ToolDia5=0
ToolDia6=0
ToolDia7=0
ToolDia8=0
ToolDia9=0
ToolDia10=0
ToolDia11=0
ToolDia12=0
ToolDia13=0
ToolDia14=0
ToolDia15=0
ToolDia16=0
ToolDia17=0
ToolDia18=0
ToolDia19=0
ToolDia20=0
ToolDia21=0
ToolDia22=0
ToolDia23=0
ToolDia24=0
ToolDia25=0
ToolDia26=0
ToolDia27=0
ToolDia28=0
ToolDia29=0
ToolDia30=0
ToolDia31=0
ToolDia32=0
ToolDia33=0
ToolDia34=0
ToolDia35=0
ToolDia36=0
ToolDia37=0
ToolDia38=0
ToolDia39=0
ToolDia40=0
ToolDia41=0
ToolDia42=0
ToolDia43=0
ToolDia44=0
ToolDia45=0
ToolDia46=0
ToolDia47=0
ToolDia48=0
ToolDia49=0
ToolDia50=0
ToolDia51=0
ToolDia52=0
ToolDia53=0
ToolDia54=0
ToolDia55=0
ToolDia56=0
ToolDia57=0
ToolDia58=0
ToolDia59=0
ToolDia60=0
ToolDia61=0
ToolDia62=0
ToolDia63=0
ToolDia64=0
ToolDia65=0
ToolDia66=0
ToolDia67=0
ToolDia68=0
ToolDia69=0
ToolDia70=0
ToolDia71=0
ToolDia72=0
ToolDia73=0
ToolDia74=0
ToolDia75=0
ToolDia76=0
ToolDia77=0
ToolDia78=0
ToolDia79=0
ToolDia80=0
ToolDia81=0
ToolDia82=0
ToolDia83=0
ToolDia84=0
ToolDia85=0
ToolDia86=0
ToolDia87=0
ToolDia88=0
ToolDia89=0
ToolDia90=0
ToolDia91=0
ToolDia92=0
ToolDia93=0
ToolDia94=0
ToolDia95=0
ToolDia96=0
Slot1=0
Description1=
Type1=
Material1=
Slot2=0
Description2=
Type2=
Material2=
Slot3=0
Description3=
Type3=
Material3=
Slot4=0
Description4=
Type4=
Material4=
Slot5=0
Description5=
Type5=
Material5=
Slot6=0
Description6=
Type6=
Material6=
Slot7=0
Description7=
Type7=
Material7=
Slot8=0
Description8=
Type8=
Material8=
Slot9=0
Description9=
Type9=
Material9=
Slot10=0
Description10=
Type10=
Material10=
Slot11=0
Description11=
Type11=
Material11=
Slot12=0
Description12=
Type12=
Material12=
Slot13=0
Description13=
Type13=
Material13=
Slot14=0
Description14=
Type14=
Material14=
Slot15=0
Description15=
Type15=
Material15=
Slot16=0
Description16=
Type16=
Material16=
Slot17=0
Description17=
Type17=
Material17=
Slot18=0
Description18=
Type18=
Material18=
Slot19=0
Description19=
Type19=
Material19=
Slot20=0
Description20=
Type20=
Material20=
Slot21=0
Description21=
Type21=
Material21=
Slot22=0
Description22=
Type22=
Material22=
Slot23=0
Description23=
Type23=
Material23=
Slot24=0
Description24=
Type24=
Material24=
Slot25=0
Description25=
Type25=
Material25=
Slot26=0
Description26=
Type26=
Material26=
Slot27=0
Description27=
Type27=
Material27=
Slot28=0
Description28=
Type28=
Material28=
Slot29=0
Description29=
Type29=
Material29=
Slot30=0
Description30=
Type30=
Material30=
Slot31=0
Description31=
Type31=
Material31=
Slot32=0
Description32=
Type32=
Material32=
Slot33=0
Description33=
Type33=
Material33=
Slot34=0
Description34=
Type34=
Material34=
Slot35=0
Description35=
Type35=
Material35=
Slot36=0
Description36=
Type36=
Material36=
Slot37=0
Description37=
Type37=
Material37=
Slot38=0
Description38=
Type38=
Material38=
Slot39=0
Description39=
Type39=
Material39=
Slot40=0
Description40=
Type40=
Material40=
Slot41=0
Description41=
Type41=
Material41=
Slot42=0
Description42=
Type42=
Material42=
Slot43=0
Description43=
Type43=
Material43=
Slot44=0
Description44=
Type44=
Material44=
Slot45=0
Description45=
Type45=
Material45=
Slot46=0
Description46=
Type46=
Material46=
Slot47=0
Description47=
Type47=
Material47=
Slot48=0
Description48=
Type48=
Material48=
Slot49=0
Description49=
Type49=
Material49=
Slot50=0
Description50=
Type50=
Material50=
Slot51=0
Description51=
Type51=
Material51=
Slot52=0
Description52=
Type52=
Material52=
Slot53=0
Description53=
Type53=
Material53=
Slot54=0
Description54=
Type54=
Material54=
Slot55=0
Description55=
Type55=
Material55=
Slot56=0
Description56=
Type56=
Material56=
Slot57=0
Description57=
Type57=
Material57=
Slot58=0
Description58=
Type58=
Material58=
Slot59=0
Description59=
Type59=
Material59=
Slot60=0
Description60=
Type60=
Material60=
Slot61=0
Description61=
Type61=
Material61=
Slot62=0
Description62=
Type62=
Material62=
Slot63=0
Description63=
Type63=
Material63=
Slot64=0
Description64=
Type64=
Material64=
Slot65=0
Description65=
Type65=
Material65=
Slot66=0
Description66=
Type66=
Material66=
Slot67=0
Description67=
Type67=
Material67=
Slot68=0
Description68=
Type68=
Material68=
Slot69=0
Description69=
Type69=
Material69=
Slot70=0
Description70=
Type70=
Material70=
Slot71=0
Description71=
Type71=
Material71=
Slot72=0
Description72=
Type72=
Material72=
Slot73=0
Description73=
Type73=
Material73=
Slot74=0
Description74=
Type74=
Material74=
Slot75=0
Description75=
Type75=
Material75=
Slot76=0
Description76=
Type76=
Material76=
Slot77=0
Description77=
Type77=
Material77=
Slot78=0
Description78=
Type78=
Material78=
Slot79=0
Description79=
Type79=
Material79=
Slot80=0
Description80=
Type80=
Material80=
Slot81=0
Description81=
Type81=
Material81=
Slot82=0
Description82=
Type82=
Material82=
Slot83=0
Description83=
Type83=
Material83=
Slot84=0
Description84=
Type84=
Material84=
Slot85=0
Description85=
Type85=
Material85=
Slot86=0
Description86=
Type86=
Material86=
Slot87=0
Description87=
Type87=
Material87=
Slot88=0
Description88=
Type88=
Material88=
Slot89=0
Description89=
Type89=
Material89=
Slot90=0
Description90=
Type90=
Material90=
Slot91=0
Description91=
Type91=
Material91=
Slot92=0
Description92=
Type92=
Material92=
Slot93=0
Description93=
Type93=
Material93=
Slot94=0
Description94=
Type94=
Material94=
Slot95=0
Description95=
Type95=
Material95=
Slot96=0
Description96=
Type96=
Material96=
TooloffsetX0=0
TooloffsetX1=0
TooloffsetX2=0
TooloffsetX3=0
TooloffsetX4=0
TooloffsetX5=0
TooloffsetX6=0
TooloffsetX7=0
TooloffsetX8=0
TooloffsetX9=0
TooloffsetX10=0
TooloffsetX11=0
TooloffsetX12=0
TooloffsetX13=0
TooloffsetX14=0
TooloffsetX15=0
TooloffsetX16=0
TooloffsetX17=0
TooloffsetX18=0
TooloffsetX19=0
TooloffsetX20=0
TooloffsetX21=0
TooloffsetX22=0
TooloffsetX23=0
TooloffsetX24=0
TooloffsetX25=0
TooloffsetX26=0
TooloffsetX27=0
TooloffsetX28=0
TooloffsetX29=0
TooloffsetX30=0
TooloffsetX31=0
TooloffsetX32=0
TooloffsetX33=0
TooloffsetX34=0
TooloffsetX35=0
TooloffsetX36=0
TooloffsetX37=0
TooloffsetX38=0
TooloffsetX39=0
TooloffsetX40=0
TooloffsetX41=0
TooloffsetX42=0
TooloffsetX43=0
TooloffsetX44=0
TooloffsetX45=0
TooloffsetX46=0
TooloffsetX47=0
TooloffsetX48=0
TooloffsetX49=0
TooloffsetX50=0
TooloffsetX51=0
TooloffsetX52=0
TooloffsetX53=0
TooloffsetX54=0
TooloffsetX55=0
TooloffsetX56=0
TooloffsetX57=0
TooloffsetX58=0
TooloffsetX59=0
TooloffsetX60=0
TooloffsetX61=0
TooloffsetX62=0
TooloffsetX63=0
TooloffsetX64=0
TooloffsetX65=0
TooloffsetX66=0
TooloffsetX67=0
TooloffsetX68=0
TooloffsetX69=0
TooloffsetX70=0
TooloffsetX71=0
TooloffsetX72=0
TooloffsetX73=0
TooloffsetX74=0
TooloffsetX75=0
TooloffsetX76=0
TooloffsetX77=0
TooloffsetX78=0
TooloffsetX79=0
TooloffsetX80=0
TooloffsetX81=0
TooloffsetX82=0
TooloffsetX83=0
TooloffsetX84=0
TooloffsetX85=0
TooloffsetX86=0
TooloffsetX87=0
TooloffsetX88=0
TooloffsetX89=0
TooloffsetX90=0
TooloffsetX91=0
TooloffsetX92=0
TooloffsetX93=0
TooloffsetX94=0
TooloffsetX95=0
TooloffsetX96=0
[Workoffset_G54]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G55]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G56]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G57]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G58]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G59]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Machinecoords]
MachinecoordsX=497.276
MachinecoordsY=124.827
MachinecoordsZ=262.884
MachinecoordsA=0
MachinecoordsB=0
MachinecoordsC=0
[Tooloffsetcoords]
TooloffsetZ=0
TooloffsetX=0
[Systemmessages]
Message0=Valid license key was not found! Application will run in demo mode!
Message1=Firmware update done!
Message2=No UC100 connection was found! Application will run in demo mode!
Message3=Firmware update in progress! Please wait and do not close the application...
Message4=The application lost the connection with the motion controller device. [nl] Check the connection. The application is closing now! [nl] Save offsets?
Message5=A machine axis position software limit was reached. The axis was now stopped.
Message6=The reset logic of the software is active! [nl] Remove the reset condition with pressing the blinking reset button on the screen. [nl] If the reset condition cannot be removed can be due to an external e-stop button is pressed in or a limit switch on the machine tool is active. [nl] Please check the Diagnostics page for the input signals condition.
Message7=The current job workspace is out of the set software limits.[nl] Adjust the softlimits to fit the job extents or disable the softlimits.
Message8=The axis is disabled. To calibrate this axis enable the axis first.
Message9=An internal error occured. The application is closing now.
Message10=Enter a valid distance in absolute value!
Message11=The calculated steps per value was saved.
Message12=Please enter valid data.
Message13=Active fixture:
Message14=Are you sure you want to close?
Message15=
Message16=
Message17=
Message18=
Message19=
Message20=
Message21=
Message22=
Message23=
Message24=
Message25=
Message26=
Message27=The Default profile cannot be deleted!
Message28=File error.Could not delete the profile's macro library!
Message29=Do you really want to delete the profile :
Message30=File error.Could not copy default macros to profile!
Message31=was loaded!
Message32=The axis calibration makes a measurement to calibrate the steps per units resolution value for the machine axis. To abort and close this window press the cancel button.
Message33=Mark the current position of the machine axis. Set the distance and the feedrate on this page and press the OK button to make a movement.
Message34=Measure the travel distance on the machine axis from the previously marked point to the current point. Type the measured value to the field below and press OK.
Message35=The new steps per value was calculated and written to the below field. To save the new value press OK. The process is then finished.
Message36=Switch spindle on first
Message37=Move Z-axis first to safeZ height:
Message38=Make movement with safeZ to:
Message39=Start position(Units):
Message40=Actual steps per Unit:
Message41=Distance to move(Units):
Message42=Feed rate(Units/min):
Message43=Distance measured(Units):
Message44=Steps per Units calculated value:
Message45=The software limits is lower than the safeZ height. Execute the command anyways?
Message46=was created!
[Hotkeysettings]
Keycode1=100039
Buttoncode1=148
Keycode2=100037
Buttoncode2=147
Keycode3=100040
Buttoncode3=149
Keycode4=100038
Buttoncode4=150
Keycode5=100034
Buttoncode5=152
Keycode6=100033
Buttoncode6=151
Keycode7=100045
Buttoncode7=153
Keycode8=100046
Buttoncode8=154
Keycode9=0
Buttoncode9=0
Keycode10=0
Buttoncode10=0
Keycode11=0
Buttoncode11=0
Keycode12=0
Buttoncode12=0
Keycode13=110069
Buttoncode13=526
Keycode14=110074
Buttoncode14=772
Keycode15=110077
Buttoncode15=20002
Keycode16=110067
Buttoncode16=20021
Keycode17=110222
Buttoncode17=20022
Keycode18=110068
Buttoncode18=20004
Keycode19=0
Buttoncode19=0
Keycode20=0
Buttoncode20=0
Keycode21=0
Buttoncode21=0
Keycode22=0
Buttoncode22=0
Keycode23=0
Buttoncode23=0
Keycode24=0
Buttoncode24=0
Keycode25=0
Buttoncode25=0
Keycode26=0
Buttoncode26=0
Keycode27=0
Buttoncode27=0
Keycode28=0
Buttoncode28=0
Keycode29=0
Buttoncode29=0
Keycode30=0
Buttoncode30=0
Keycode31=0
Buttoncode31=0
Keycode32=0
Buttoncode32=0
Keycode33=0
Buttoncode33=0
Keycode34=0
Buttoncode34=0
Keycode35=0
Buttoncode35=0
Keycode36=0
Buttoncode36=0
Keycode37=0
Buttoncode37=0
Keycode38=0
Buttoncode38=0
Keycode39=0
Buttoncode39=0
Keycode40=0
Buttoncode40=0
Keycode41=0
Buttoncode41=0
Keycode42=0
Buttoncode42=0
Keycode43=0
Buttoncode43=0
Keycode44=0
Buttoncode44=0
Keycode45=0
Buttoncode45=0
Keycode46=0
Buttoncode46=0
Keycode47=0
Buttoncode47=0
Keycode48=0
Buttoncode48=0
Keycode49=0
Buttoncode49=0
Keycode50=0
Buttoncode50=0
Keycode51=0
Buttoncode51=0
Keycode52=0
Buttoncode52=0
Keycode53=0
Buttoncode53=0
Keycode54=0
Buttoncode54=0
Keycode55=0
Buttoncode55=0
Keycode56=0
Buttoncode56=0
Keycode57=0
Buttoncode57=0
Keycode58=0
Buttoncode58=0
Keycode59=0
Buttoncode59=0
Keycode60=0
Buttoncode60=0
Keycode61=0
Buttoncode61=0
Keycode62=0
Buttoncode62=0
Keycode63=0
Buttoncode63=0
Keycode64=0
Buttoncode64=0
Keycode65=0
Buttoncode65=0
Keycode66=0
Buttoncode66=0
Keycode67=0
Buttoncode67=0
Keycode68=0
Buttoncode68=0
Keycode69=0
Buttoncode69=0
Keycode70=0
Buttoncode70=0
Keycode71=0
Buttoncode71=0
Keycode72=0
Buttoncode72=0
Keycode73=0
Buttoncode73=0
Keycode74=0
Buttoncode74=0
Keycode75=0
Buttoncode75=0
Keycode76=0
Buttoncode76=0
Keycode77=0
Buttoncode77=0
Keycode78=0
Buttoncode78=0
Keycode79=0
Buttoncode79=0
Keycode80=0
Buttoncode80=0
Keycode81=0
Buttoncode81=0
Keycode82=0
Buttoncode82=0
Keycode83=0
Buttoncode83=0
Keycode84=0
Buttoncode84=0
Keycode85=0
Buttoncode85=0
Keycode86=0
Buttoncode86=0
Keycode87=0
Buttoncode87=0
Keycode88=0
Buttoncode88=0
Keycode89=0
Buttoncode89=0
Keycode90=0
Buttoncode90=0
Keycode91=0
Buttoncode91=0
Keycode92=0
Buttoncode92=0
Keycode93=0
Buttoncode93=0
Keycode94=0
Buttoncode94=0
Keycode95=0
Buttoncode95=0
Keycode96=0
Buttoncode96=0
[Inputtriggersettings]
Pin1=0
Port1=0
Buttoncode1=0
Activelow1=False
Pin2=0
Port2=0
Buttoncode2=0
Activelow2=False
Pin3=0
Port3=0
Buttoncode3=0
Activelow3=False
Pin4=0
Port4=0
Buttoncode4=0
Activelow4=False
Pin5=0
Port5=0
Buttoncode5=0
Activelow5=False
Pin6=0
Port6=0
Buttoncode6=0
Activelow6=False
Pin7=0
Port7=0
Buttoncode7=0
Activelow7=False
Pin8=0
Port8=0
Buttoncode8=0
Activelow8=False
Pin9=0
Port9=0
Buttoncode9=0
Activelow9=False
Pin10=0
Port10=0
Buttoncode10=0
Activelow10=False
Pin11=0
Port11=0
Buttoncode11=0
Activelow11=False
Pin12=0
Port12=0
Buttoncode12=0
Activelow12=False
Pin13=0
Port13=0
Buttoncode13=0
Activelow13=False
Pin14=0
Port14=0
Buttoncode14=0
Activelow14=False
Pin15=0
Port15=0
Buttoncode15=0
Activelow15=False
Pin16=0
Port16=0
Buttoncode16=0
Activelow16=False
Pin17=0
Port17=0
Buttoncode17=0
Activelow17=False
Pin18=0
Port18=0
Buttoncode18=0
Activelow18=False
Pin19=0
Port19=0
Buttoncode19=0
Activelow19=False
Pin20=0
Port20=0
Buttoncode20=0
Activelow20=False
Pin21=0
Port21=0
Buttoncode21=0
Activelow21=False
Pin22=0
Port22=0
Buttoncode22=0
Activelow22=False
Pin23=0
Port23=0
Buttoncode23=0
Activelow23=False
Pin24=0
Port24=0
Buttoncode24=0
Activelow24=False
Pin25=0
Port25=0
Buttoncode25=0
Activelow25=False
Pin26=0
Port26=0
Buttoncode26=0
Activelow26=False
Pin27=0
Port27=0
Buttoncode27=0
Activelow27=False
Pin28=0
Port28=0
Buttoncode28=0
Activelow28=False
Pin29=0
Port29=0
Buttoncode29=0
Activelow29=False
Pin30=0
Port30=0
Buttoncode30=0
Activelow30=False
Pin31=0
Port31=0
Buttoncode31=0
Activelow31=False
Pin32=0
Port32=0
Buttoncode32=0
Activelow32=False
Pin33=0
Port33=0
Buttoncode33=0
Activelow33=False
Pin34=0
Port34=0
Buttoncode34=0
Activelow34=False
Pin35=0
Port35=0
Buttoncode35=0
Activelow35=False
Pin36=0
Port36=0
Buttoncode36=0
Activelow36=False
Pin37=0
Port37=0
Buttoncode37=0
Activelow37=False
Pin38=0
Port38=0
Buttoncode38=0
Activelow38=False
Pin39=0
Port39=0
Buttoncode39=0
Activelow39=False
Pin40=0
Port40=0
Buttoncode40=0
Activelow40=False
Pin41=0
Port41=0
Buttoncode41=0
Activelow41=False
Pin42=0
Port42=0
Buttoncode42=0
Activelow42=False
Pin43=0
Port43=0
Buttoncode43=0
Activelow43=False
Pin44=0
Port44=0
Buttoncode44=0
Activelow44=False
Pin45=0
Port45=0
Buttoncode45=0
Activelow45=False
Pin46=0
Port46=0
Buttoncode46=0
Activelow46=False
Pin47=0
Port47=0
Buttoncode47=0
Activelow47=False
Pin48=0
Port48=0
Buttoncode48=0
Activelow48=False
Pin49=0
Port49=0
Buttoncode49=0
Activelow49=False
Pin50=0
Port50=0
Buttoncode50=0
Activelow50=False
Pin51=0
Port51=0
Buttoncode51=0
Activelow51=False
Pin52=0
Port52=0
Buttoncode52=0
Activelow52=False
Pin53=0
Port53=0
Buttoncode53=0
Activelow53=False
Pin54=0
Port54=0
Buttoncode54=0
Activelow54=False
Pin55=0
Port55=0
Buttoncode55=0
Activelow55=False
Pin56=0
Port56=0
Buttoncode56=0
Activelow56=False
Pin57=0
Port57=0
Buttoncode57=0
Activelow57=False
Pin58=0
Port58=0
Buttoncode58=0
Activelow58=False
Pin59=0
Port59=0
Buttoncode59=0
Activelow59=False
Pin60=0
Port60=0
Buttoncode60=0
Activelow60=False
Pin61=0
Port61=0
Buttoncode61=0
Activelow61=False
Pin62=0
Port62=0
Buttoncode62=0
Activelow62=False
Pin63=0
Port63=0
Buttoncode63=0
Activelow63=False
Pin64=0
Port64=0
Buttoncode64=0
Activelow64=False
Pin65=0
Port65=0
Buttoncode65=0
Activelow65=False
Pin66=0
Port66=0
Buttoncode66=0
Activelow66=False
Pin67=0
Port67=0
Buttoncode67=0
Activelow67=False
Pin68=0
Port68=0
Buttoncode68=0
Activelow68=False
Pin69=0
Port69=0
Buttoncode69=0
Activelow69=False
Pin70=0
Port70=0
Buttoncode70=0
Activelow70=False
Pin71=0
Port71=0
Buttoncode71=0
Activelow71=False
Pin72=0
Port72=0
Buttoncode72=0
Activelow72=False
Pin73=0
Port73=0
Buttoncode73=0
Activelow73=False
Pin74=0
Port74=0
Buttoncode74=0
Activelow74=False
Pin75=0
Port75=0
Buttoncode75=0
Activelow75=False
Pin76=0
Port76=0
Buttoncode76=0
Activelow76=False
Pin77=0
Port77=0
Buttoncode77=0
Activelow77=False
Pin78=0
Port78=0
Buttoncode78=0
Activelow78=False
Pin79=0
Port79=0
Buttoncode79=0
Activelow79=False
Pin80=0
Port80=0
Buttoncode80=0
Activelow80=False
Pin81=0
Port81=0
Buttoncode81=0
Activelow81=False
Pin82=0
Port82=0
Buttoncode82=0
Activelow82=False
Pin83=0
Port83=0
Buttoncode83=0
Activelow83=False
Pin84=0
Port84=0
Buttoncode84=0
Activelow84=False
Pin85=0
Port85=0
Buttoncode85=0
Activelow85=False
Pin86=0
Port86=0
Buttoncode86=0
Activelow86=False
Pin87=0
Port87=0
Buttoncode87=0
Activelow87=False
Pin88=0
Port88=0
Buttoncode88=0
Activelow88=False
Pin89=0
Port89=0
Buttoncode89=0
Activelow89=False
Pin90=0
Port90=0
Buttoncode90=0
Activelow90=False
Pin91=0
Port91=0
Buttoncode91=0
Activelow91=False
Pin92=0
Port92=0
Buttoncode92=0
Activelow92=False
Pin93=0
Port93=0
Buttoncode93=0
Activelow93=False
Pin94=0
Port94=0
Buttoncode94=0
Activelow94=False
Pin95=0
Port95=0
Buttoncode95=0
Activelow95=False
Pin96=0
Port96=0
Buttoncode96=0
Activelow96=False
[Outputtriggersettings]
Pin1=0
Port1=0
LEDcode1=0
Invert1=False
Pin2=0
Port2=0
LEDcode2=0
Invert2=False
Pin3=0
Port3=0
LEDcode3=0
Invert3=False
Pin4=0
Port4=0
LEDcode4=0
Invert4=False
Pin5=0
Port5=0
LEDcode5=0
Invert5=False
Pin6=0
Port6=0
LEDcode6=0
Invert6=False
Pin7=0
Port7=0
LEDcode7=0
Invert7=False
Pin8=0
Port8=0
LEDcode8=0
Invert8=False
Pin9=0
Port9=0
LEDcode9=0
Invert9=False
Pin10=0
Port10=0
LEDcode10=0
Invert10=False
Pin11=0
Port11=0
LEDcode11=0
Invert11=False
Pin12=0
Port12=0
LEDcode12=0
Invert12=False
Pin13=0
Port13=0
LEDcode13=0
Invert13=False
Pin14=0
Port14=0
LEDcode14=0
Invert14=False
Pin15=0
Port15=0
LEDcode15=0
Invert15=False
Pin16=0
Port16=0
LEDcode16=0
Invert16=False
Pin17=0
Port17=0
LEDcode17=0
Invert17=False
Pin18=0
Port18=0
LEDcode18=0
Invert18=False
Pin19=0
Port19=0
LEDcode19=0
Invert19=False
Pin20=0
Port20=0
LEDcode20=0
Invert20=False
Pin21=0
Port21=0
LEDcode21=0
Invert21=False
Pin22=0
Port22=0
LEDcode22=0
Invert22=False
Pin23=0
Port23=0
LEDcode23=0
Invert23=False
Pin24=0
Port24=0
LEDcode24=0
Invert24=False
Pin25=0
Port25=0
LEDcode25=0
Invert25=False
Pin26=0
Port26=0
LEDcode26=0
Invert26=False
Pin27=0
Port27=0
LEDcode27=0
Invert27=False
Pin28=0
Port28=0
LEDcode28=0
Invert28=False
Pin29=0
Port29=0
LEDcode29=0
Invert29=False
Pin30=0
Port30=0
LEDcode30=0
Invert30=False
Pin31=0
Port31=0
LEDcode31=0
Invert31=False
Pin32=0
Port32=0
LEDcode32=0
Invert32=False
Pin33=0
Port33=0
LEDcode33=0
Invert33=False
Pin34=0
Port34=0
LEDcode34=0
Invert34=False
Pin35=0
Port35=0
LEDcode35=0
Invert35=False
Pin36=0
Port36=0
LEDcode36=0
Invert36=False
Pin37=0
Port37=0
LEDcode37=0
Invert37=False
Pin38=0
Port38=0
LEDcode38=0
Invert38=False
Pin39=0
Port39=0
LEDcode39=0
Invert39=False
Pin40=0
Port40=0
LEDcode40=0
Invert40=False
Pin41=0
Port41=0
LEDcode41=0
Invert41=False
Pin42=0
Port42=0
LEDcode42=0
Invert42=False
Pin43=0
Port43=0
LEDcode43=0
Invert43=False
Pin44=0
Port44=0
LEDcode44=0
Invert44=False
Pin45=0
Port45=0
LEDcode45=0
Invert45=False
Pin46=0
Port46=0
LEDcode46=0
Invert46=False
Pin47=0
Port47=0
LEDcode47=0
Invert47=False
Pin48=0
Port48=0
LEDcode48=0
Invert48=False
Pin49=0
Port49=0
LEDcode49=0
Invert49=False
Pin50=0
Port50=0
LEDcode50=0
Invert50=False
Pin51=0
Port51=0
LEDcode51=0
Invert51=False
Pin52=0
Port52=0
LEDcode52=0
Invert52=False
Pin53=0
Port53=0
LEDcode53=0
Invert53=False
Pin54=0
Port54=0
LEDcode54=0
Invert54=False
Pin55=0
Port55=0
LEDcode55=0
Invert55=False
Pin56=0
Port56=0
LEDcode56=0
Invert56=False
Pin57=0
Port57=0
LEDcode57=0
Invert57=False
Pin58=0
Port58=0
LEDcode58=0
Invert58=False
Pin59=0
Port59=0
LEDcode59=0
Invert59=False
Pin60=0
Port60=0
LEDcode60=0
Invert60=False
Pin61=0
Port61=0
LEDcode61=0
Invert61=False
Pin62=0
Port62=0
LEDcode62=0
Invert62=False
Pin63=0
Port63=0
LEDcode63=0
Invert63=False
Pin64=0
Port64=0
LEDcode64=0
Invert64=False
Pin65=0
Port65=0
LEDcode65=0
Invert65=False
Pin66=0
Port66=0
LEDcode66=0
Invert66=False
Pin67=0
Port67=0
LEDcode67=0
Invert67=False
Pin68=0
Port68=0
LEDcode68=0
Invert68=False
Pin69=0
Port69=0
LEDcode69=0
Invert69=False
Pin70=0
Port70=0
LEDcode70=0
Invert70=False
Pin71=0
Port71=0
LEDcode71=0
Invert71=False
Pin72=0
Port72=0
LEDcode72=0
Invert72=False
Pin73=0
Port73=0
LEDcode73=0
Invert73=False
Pin74=0
Port74=0
LEDcode74=0
Invert74=False
Pin75=0
Port75=0
LEDcode75=0
Invert75=False
Pin76=0
Port76=0
LEDcode76=0
Invert76=False
Pin77=0
Port77=0
LEDcode77=0
Invert77=False
Pin78=0
Port78=0
LEDcode78=0
Invert78=False
Pin79=0
Port79=0
LEDcode79=0
Invert79=False
Pin80=0
Port80=0
LEDcode80=0
Invert80=False
Pin81=0
Port81=0
LEDcode81=0
Invert81=False
Pin82=0
Port82=0
LEDcode82=0
Invert82=False
Pin83=0
Port83=0
LEDcode83=0
Invert83=False
Pin84=0
Port84=0
LEDcode84=0
Invert84=False
Pin85=0
Port85=0
LEDcode85=0
Invert85=False
Pin86=0
Port86=0
LEDcode86=0
Invert86=False
Pin87=0
Port87=0
LEDcode87=0
Invert87=False
Pin88=0
Port88=0
LEDcode88=0
Invert88=False
Pin89=0
Port89=0
LEDcode89=0
Invert89=False
Pin90=0
Port90=0
LEDcode90=0
Invert90=False
Pin91=0
Port91=0
LEDcode91=0
Invert91=False
Pin92=0
Port92=0
LEDcode92=0
Invert92=False
Pin93=0
Port93=0
LEDcode93=0
Invert93=False
Pin94=0
Port94=0
LEDcode94=0
Invert94=False
Pin95=0
Port95=0
LEDcode95=0
Invert95=False
Pin96=0
Port96=0
LEDcode96=0
Invert96=False
[CAMsettings]
Tooldia=6
Startdepth=0
Cutdepth=-1
Cutperpass=1
SafeZ=25
Feedrate=1000
Tooloverlap=50
Plungerate=400
Spindlespeed=5000
Arctolerance=0.01
Dospindleswitching=False
[Laserengraveplugin]
workpiecewidth=50
workpieceheight=50
keepaspectratio=True
Yscandistance=0.2
Feedrate=1000
Originsetting=7
[Plugins_enabled]
Debugger.dll=False
Diagnostics.dll=True
Laserengrave.dll=False
Plugintest.dll=True
Webcamera.dll=False
Printer3D.dll=False
UCR200Plugin.dll=False
Xbox360controller.dll=False
Scope.dll=False
Probing.dll=True
AutoBackupProfile.dll=False
AutoLevelerCA.dll=False
C76 Fault Reporting.dll=False
Console.dll=True
FaultSignals.dll=False
Lubricator.dll=False
Modbusmaster.dll=False
Pinout.dll=False
UCCNC_OSK.dll=False
UCR201Plugin.dll=False
XHC-HB04_pendant.dll=False
[Plugins_callstartup]
Debugger.dll=False
Diagnostics.dll=False
Laserengrave.dll=False
Plugintest.dll=False
Webcamera.dll=False
Printer3D.dll=False
UCR200Plugin.dll=False
Xbox360controller.dll=False
Scope.dll=False
Probing.dll=False
AutoBackupProfile.dll=False
AutoLevelerCA.dll=False
C76 Fault Reporting.dll=False
Console.dll=False
FaultSignals.dll=False
Lubricator.dll=False
Modbusmaster.dll=False
Pinout.dll=False
UCCNC_OSK.dll=False
UCR201Plugin.dll=False
XHC-HB04_pendant.dll=False
[Macroloops]
Macroloopautorun0=True
Macroloopnumber0=20001
Macroloopautorun1=True
Macroloopnumber1=20002
Macroloopautorun2=True
Macroloopnumber2=20004
Macroloopautorun3=False
Macroloopnumber3=0
Macroloopautorun4=False
Macroloopnumber4=0
Macroloopautorun5=False
Macroloopnumber5=0
Macroloopautorun6=False
Macroloopnumber6=0
Macroloopautorun7=False
Macroloopnumber7=0
Macroloopautorun8=False
Macroloopnumber8=0
Macroloopautorun9=False
Macroloopnumber9=0
Macroloopautorun10=False
Macroloopnumber10=0
Macroloopautorun11=False
Macroloopnumber11=0
Macroloopautorun12=False
Macroloopnumber12=0
Macroloopautorun13=False
Macroloopnumber13=0
Macroloopautorun14=False
Macroloopnumber14=0
Macroloopautorun15=False
Macroloopnumber15=0
Macroloopautorun16=False
Macroloopnumber16=0
Macroloopautorun17=False
Macroloopnumber17=0
Macroloopautorun18=False
Macroloopnumber18=0
Macroloopautorun19=False
Macroloopnumber19=0
Macroloopautorun20=False
Macroloopnumber20=0
Macroloopautorun21=False
Macroloopnumber21=0
Macroloopautorun22=False
Macroloopnumber22=0
Macroloopautorun23=False
Macroloopnumber23=0
Macroloopautorun24=False
Macroloopnumber24=0
Macroloopautorun25=False
Macroloopnumber25=0
Macroloopautorun26=False
Macroloopnumber26=0
Macroloopautorun27=False
Macroloopnumber27=0
Macroloopautorun28=False
Macroloopnumber28=0
Macroloopautorun29=False
Macroloopnumber29=0
Macroloopautorun30=False
Macroloopnumber30=0
Macroloopautorun31=False
Macroloopnumber31=0
Macroloopautorun32=False
Macroloopnumber32=0
Macroloopautorun33=False
Macroloopnumber33=0
Macroloopautorun34=False
Macroloopnumber34=0
Macroloopautorun35=False
Macroloopnumber35=0
Macroloopautorun36=False
Macroloopnumber36=0
Macroloopautorun37=False
Macroloopnumber37=0
Macroloopautorun38=False
Macroloopnumber38=0
Macroloopautorun39=False
Macroloopnumber39=0
Macroloopautorun40=False
Macroloopnumber40=0
Macroloopautorun41=False
Macroloopnumber41=0
Macroloopautorun42=False
Macroloopnumber42=0
Macroloopautorun43=False
Macroloopnumber43=0
Macroloopautorun44=False
Macroloopnumber44=0
Macroloopautorun45=False
Macroloopnumber45=0
Macroloopautorun46=False
Macroloopnumber46=0
Macroloopautorun47=False
Macroloopnumber47=0
[Probing]
Mode=1
Tool=1,Z,0
Simple=X,0
Angle=Y,0,X,0
Pocket=X,0
Outer=X,0,X,0
InnerCorner=1,Z,0,X,0
OuterCorner=4,X,0,X,0
RectInner=X,0,X,0
CircleInner=X,0,X,0
RectOuter=X,0,X,0,X,0
CircleOuter=X,100,Y,200,X,0
Common=X,0,X,0,X,0
GageHeight=0
FineDistance=0.0001
Retract=0
FastFeed=0.001
FineFeed=0.001
ZeroProbedAxis=False
ZeroOnAllOffsets=False
SingleProbeMode=False
EnableRetract=False
PauseBeforeProbe=False
CommonAxisSettings=False
Axis1CountGage=False
Axis1CountDia=False
Axis2CountGage=False
Axis2CountDia=False
SafeX=0
SafeY=0
SafeZ=0
SafeXPositive=False
SafeYPositive=False
SafeZPositive=False
SaveMobileProbePos=False
SaveWpReferences=False
OverrideProbeDia=False
ProbeDiameterOvr=0
ReferenceToolNumber=0
FixedProbePos=False,-1,True,0,True,0,True,0,False,0,False,0,False,0,0,False,0
ManualProbeMode=False
Set_ToolProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_SimpleProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_AngleProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_PocketProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_OuterProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_InnerCornerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_OuterCornerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_RectInnerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_CircleInnerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_RectOuterProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
Set_CircleOuterProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False,False
LimitTraverseSpeed=False
TraverseSpeedLimit=0.001
Blower=1,0,1
BlowerPort=0
BlowerPin=0
BlowerActiveLow=False
SeparateSettingsPerMode=False
InfoWindowPos=133,254
Version=1.030500
OffsetProbe=False
ProbeOffset=0,0,0,0,0,0
[Statistics]
TotalM3s=1049
TotalM4s=51
TotalM7s=38
TotalM8s=330
Totaltimedays=35
Totaltimehours=4
Totaltimeminutes=47
Totaltimeseconds=43
M3timedays=2
M3timehours=6
M3timeminutes=24
M3timeseconds=13
M4timedays=0
M4timehours=0
M4timeminutes=9
M4timeseconds=4
Cyclestimedays=2
Cyclestimehours=10
Cyclestimeminutes=30
Cyclestimeseconds=11
TotaldistX=-2146900080
TotalcutX=-2147018417
TotaldistY=-2147275910
TotalcutY=-2147311191
TotaldistZ=-2147372260
TotalcutZ=-2147430256
TotaldistA=-2147483648
TotalcutA=-2147483648
TotaldistB=-2147483648
TotalcutB=-2147483648
TotaldistC=-2147483648
TotalcutC=-2147483648
UCdevicetype=UC300ETH_5LPT
Softwareversion=1.2116
[SpindlePIDsettings]
PIDenable=True
Kp=0.95
Kd=0
Ki=0.025
Samplingtime=5
[AUXencodersettings]
AUXencoder1pinA=0
AUXencoder1portA=0
AUXencoder1pinB=0
AUXencoder1portB=0
AUXencoder2pinA=0
AUXencoder2portA=0
AUXencoder2pinB=0
AUXencoder2portB=0
AUXencoder3pinA=0
AUXencoder3portA=0
AUXencoder3pinB=0
AUXencoder3portB=0
AUXencoder4pinA=0
AUXencoder4portA=0
AUXencoder4pinB=0
AUXencoder4portB=0
AUXencoder5pinA=0
AUXencoder5portA=0
AUXencoder5pinB=0
AUXencoder5portB=0
AUXencoder6pinA=0
AUXencoder6portA=0
AUXencoder6pinB=0
AUXencoder6portB=0
Aux1Encodercountsper=1
Aux2Encodercountsper=1
Aux3Encodercountsper=1
Aux4Encodercountsper=1
Aux5Encodercountsper=1
Aux6Encodercountsper=1
[Digitizesettings]
Addaxisnames=False
Xinclude=True
Yinclude=True
Zinclude=True
Ainclude=False
Binclude=False
Cinclude=False
Commaseparation=False
Filenametosave=C:\UCCNC\Example_codes\Digitize.txt
Numberofdigits=4
Probedia=0
Clearfilenamewhenfinished=False
[RFHsettings]
Switchspindlemode=1
Doinitialmoveswithrapid=True
[Console]
Macrocompileerrors=True
FontFamily=Courier New
FontSize=15.75
FontBold=False


[cncdrive]

Maybe the problem is that the acceleration setting for the spindle was changed.
Prior to 2.2116 we used acceleration parameter and now we use spin up time.
So, please check the spindle parameters, check what is the spindle spin up time, because it is probably too high.

[dezsoe]

In the attached profile Spindlespinuptime=1 is set, so the problem is something else. (I could not test the issue, because I don't have both analog control and encoder on the same machine.)

[paso]

Good morning, I have checked the acceleration parameters and confirm that they are correct. It would appear that with this version the PID control does not work. It's a shame to lose this feature, you can check this problem, I'm waiting for your news, thank you.

[cncdrive]

Thank you for the feedback, we will test it soon.

[cncdrive]

Yes, the problem exists in 1.2116, probably the spindle acceleration parameter change causes it.
Will fix it soon.