Led 244 probe hit

[Battwell]

I had written a repeat probe routine that tracks led 224 probe hit
Had never noticed before but customer has!
The probe complete fails approx 1:30 times
Confirmed with stop after a failed led read.
I put the led on screen to confirm.
It doesn’t always set after a good probe.
( probe led is on and axis had stopped after probing as it should)
Weird that I have not caught this previously.
Ver 2.113

[mickecarlsson]

Does the customer have an UCR201 pendant?

[Battwell]

No
Plug-in is disabled. ( I know that fault)

[ger21]

I believe that this is a known bug?

[mickecarlsson]

Download and install 1.2115 with the API bug fixed:

Here is a quick fix, this is the same as version 1.2115, but with the probe bug fixed: https://drive.google.com/file/d/1grm6MutYBom9WhEVK-zEW-cyG55w1w6z/view?usp=sharing
We released it under the same software version, because there are no changes compared to 1.2115 except this fix, so only the API version changed.

[Battwell]

macro was re written to check probe led 37. ok since.

[Battwell]

to confirm. led 244 doesnt always report correct in latest 115 version. (201 plugin fix version)