Page 2 of 3

Re: 1.2104 skip randomly gcode

PostPosted: Sat Apr 14, 2018 7:01 pm
by Robertspark
I think that's accepted

That's why there is a stable and development release.

Think what the problem is cncdrive has been quiet, so Andrew is not sure if the issue is being looked at.

The problem is it occurs at non consistent locations and can occur after many runs.

Hence repeatability is difficult.

Just wondering...
Is there a logging diagnostic mode, that uccnc could output a log per job that can be compared side by side

Re: 1.2104 skip randomly gcode

PostPosted: Sat Apr 14, 2018 8:16 pm
by dezsoe
It seems like I could find a way to reproduce the random (or sometimes repeatable) movements. The guys are working on the resolution, so give them a little patience... :)

Re: 1.2104 skip randomly gcode

PostPosted: Sat Apr 14, 2018 8:37 pm
by Robertspark
No problem, I think Andrew was just looking for someone to say it was being looked into.

Re: 1.2104 skip randomly gcode

PostPosted: Sat Apr 14, 2018 9:25 pm
by Robertspark
No problem, welcome for any comments to try to incorperate when the next one comes out

Re: 1.2104 skip randomly gcode

PostPosted: Wed Apr 18, 2018 7:53 am
by cncdrive
Sorry guys, but I had some health issues and was in hospital and still recoverning is why there was no useful response for this yet.
But I can confirm now that the issue posted in this thread is really a problem in test version 1.2104, my collegues could already reproduce it and working on resolving it.
We will post a new test version soon with this issue corrected.

Re: 1.2104 skip randomly gcode

PostPosted: Wed Apr 18, 2018 12:19 pm
by Robertspark
Sorry to hear, hope you return to good health.

Re: 1.2104 skip randomly gcode

PostPosted: Wed Apr 18, 2018 9:46 pm
by cncdrive
Thank you Rob, I'm working on recovering as fast as possible.

Re: 1.2104 skip randomly gcode

PostPosted: Wed Apr 18, 2018 9:52 pm
by Robertspark
No problem, take your time, don't rush it or it will take longer (at least we know, so now we can let others know that support won't be instant like we have all come to expect {internet + email age....press send / post and expect the other person is just sat there waiting for the email / post to land to answer instantly + fix.... or do whatever...} )

Re: 1.2104 skip randomly gcode

PostPosted: Wed Apr 18, 2018 10:02 pm
by cncdrive
My collegues are still working, taking customers' orders, packing, shipping and they also answering emails all day long, so that I'm sick fortunately does not stop things, just my collegues are a bit more overloaded and so things are a bit slower.
On the forum Dezsoe took my work now, so he can answer questions as he did in many cases, but ofcourse there can be questions which only me or the other Balazs can answer, but Dezsoe is also in contact with the other developer Balazs, so in case of any complicated questions he can still discuss with him and then answer and he can also report the issues and so it can be debugged and corrected without me. So, these things are a bit slower now, but nothing has stopped.
And I'm gaining more strenght every day, so I'm sure I can come back full time work soon.

Re: 1.2104 skip randomly gcode

PostPosted: Fri Apr 20, 2018 5:52 am
by shad
Hi Balazs!
Take care of yourself.
I think it's time for CNCdrive company to expand ;)