1.2104 skip randomly gcode

If you think you've found a bug post it here.

Re: 1.2104 skip randomly gcode

Postby Robertspark » Sat Apr 14, 2018 7:01 pm

I think that's accepted

That's why there is a stable and development release.

Think what the problem is cncdrive has been quiet, so Andrew is not sure if the issue is being looked at.

The problem is it occurs at non consistent locations and can occur after many runs.

Hence repeatability is difficult.

Just wondering...
Is there a logging diagnostic mode, that uccnc could output a log per job that can be compared side by side
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2110, Neuron Lite
UCCNC v1.2110 Macro Manual
Robertspark
 
Posts: 1383
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: 1.2104 skip randomly gcode

Postby dezsoe » Sat Apr 14, 2018 8:16 pm

It seems like I could find a way to reproduce the random (or sometimes repeatable) movements. The guys are working on the resolution, so give them a little patience... :)
dezsoe
 
Posts: 812
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: 1.2104 skip randomly gcode

Postby Robertspark » Sat Apr 14, 2018 8:37 pm

No problem, I think Andrew was just looking for someone to say it was being looked into.
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2110, Neuron Lite
UCCNC v1.2110 Macro Manual
Robertspark
 
Posts: 1383
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: 1.2104 skip randomly gcode

Postby Robertspark » Sat Apr 14, 2018 9:25 pm

No problem, welcome for any comments to try to incorperate when the next one comes out
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2110, Neuron Lite
UCCNC v1.2110 Macro Manual
Robertspark
 
Posts: 1383
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: 1.2104 skip randomly gcode

Postby cncdrive » Wed Apr 18, 2018 7:53 am

Sorry guys, but I had some health issues and was in hospital and still recoverning is why there was no useful response for this yet.
But I can confirm now that the issue posted in this thread is really a problem in test version 1.2104, my collegues could already reproduce it and working on resolving it.
We will post a new test version soon with this issue corrected.
cncdrive
Site Admin
 
Posts: 2833
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2104 skip randomly gcode

Postby Robertspark » Wed Apr 18, 2018 12:19 pm

Sorry to hear, hope you return to good health.
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2110, Neuron Lite
UCCNC v1.2110 Macro Manual
Robertspark
 
Posts: 1383
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: 1.2104 skip randomly gcode

Postby cncdrive » Wed Apr 18, 2018 9:46 pm

Thank you Rob, I'm working on recovering as fast as possible.
cncdrive
Site Admin
 
Posts: 2833
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2104 skip randomly gcode

Postby Robertspark » Wed Apr 18, 2018 9:52 pm

No problem, take your time, don't rush it or it will take longer (at least we know, so now we can let others know that support won't be instant like we have all come to expect {internet + email age....press send / post and expect the other person is just sat there waiting for the email / post to land to answer instantly + fix.... or do whatever...} )
Rob
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2110, Neuron Lite
UCCNC v1.2110 Macro Manual
Robertspark
 
Posts: 1383
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Re: 1.2104 skip randomly gcode

Postby cncdrive » Wed Apr 18, 2018 10:02 pm

My collegues are still working, taking customers' orders, packing, shipping and they also answering emails all day long, so that I'm sick fortunately does not stop things, just my collegues are a bit more overloaded and so things are a bit slower.
On the forum Dezsoe took my work now, so he can answer questions as he did in many cases, but ofcourse there can be questions which only me or the other Balazs can answer, but Dezsoe is also in contact with the other developer Balazs, so in case of any complicated questions he can still discuss with him and then answer and he can also report the issues and so it can be debugged and corrected without me. So, these things are a bit slower now, but nothing has stopped.
And I'm gaining more strenght every day, so I'm sure I can come back full time work soon.
cncdrive
Site Admin
 
Posts: 2833
Joined: Tue Aug 12, 2014 11:17 pm

Re: 1.2104 skip randomly gcode

Postby shad » Fri Apr 20, 2018 5:52 am

Hi Balazs!
Take care of yourself.
I think it's time for CNCdrive company to expand ;)
-- Andrew
UC400ETH
UC300ETH-5LPT
NEURON Lite THC
http://neuroncnc.com/
shad
 
Posts: 293
Joined: Thu Sep 15, 2016 5:23 pm

PreviousNext

Return to Report a bug

Who is online

Users browsing this forum: No registered users and 3 guests