Conversational Wizards

Discuss the creation and usage of Wizards

Re: Conversational Wizards

Postby Dan911 » Sat Jan 13, 2018 2:27 am

Finishing up forth wizard. Create and cut square or rectangle with editable/type corners. Will upload soon, just haven't had a chance for thorough testing.

sqyare-rectangle.JPG
Dan911
 
Posts: 305
Joined: Mon Oct 31, 2016 1:22 am
Location: USA

Re: Conversational Wizards

Postby Sword » Sat Jan 13, 2018 4:57 am

Back when I used Mach3 (10+ years ago), I made myself a keyslot or hangslot wizard. I do 1000's of various size plaques throughout the year and they all need keyhole slots of some form on them, so over the years, I've made a couple versions that worked on the machines I had/have (the old Mach3 wizard version and an input only driven one that used plain Basic). I even started making a stand alone one with VB.net several years ago, but not being a real programmer, I got lost in the code that was needed and kind of abandoned it.

Anyway, I thought I'd suggest it as a wizard and show a screenshot of the one I made for Mach3 and the abandoned .net one.

Scott
Attachments
Keyhole Wizard.JPG
KeySlotter.JPG
Sword
 
Posts: 16
Joined: Fri Dec 08, 2017 10:45 pm

Re: Conversational Wizards

Postby Vmax549 » Sat Jan 13, 2018 5:54 am

IF you can upload the mach3 ver OR send me teh Wizard. I will take a look at converting it to UCCNC for you.

(;-) TP
Vmax549
 
Posts: 922
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Conversational Wizards

Postby Sword » Mon Jan 15, 2018 2:32 am

I'll see if I can dig up all the bits and pieces of it.
Sword
 
Posts: 16
Joined: Fri Dec 08, 2017 10:45 pm

Re: Conversational Wizards

Postby Sword » Mon Jan 15, 2018 7:48 pm

Here's the old Mach3 version. In the VB version, I was setting it up for a center vertical one also. Some combination were not allowed, because it wouldn't make sense to do. For instance, only one centered vertical one was allowed as well as only one of the vertical pairs. Both horizontal center ones could be. I had some preset ones in the Mach3 version, but was working towards being able to save a set of settings as a preset in the VB version. If you think you could work with the VB version, I can see what I can zip up for that. It's been a while since I worked on it, so I'd have to see if I can get all the pieces together.
Attachments
Hangslots.zip
(332.42 KiB) Downloaded 21 times
Sword
 
Posts: 16
Joined: Fri Dec 08, 2017 10:45 pm

Previous

Return to Conversational Wizards

Who is online

Users browsing this forum: No registered users and 1 guest

cron