Bolt Circle Wizard

Discuss the creation and usage of Wizards

Bolt Circle Wizard

Postby Vmax549 » Thu Jun 14, 2018 2:54 am

Here is a simple Bolt Circle Wizard to play with. Unzip it into your Macro Folder then call it from the MDI or hotkey as M9094. As normal this wizard can run mouseless. Use the {TAB} key to move through the data fields and enter data and to the Gcode button and then press ENTER.
Attachments
BoltCircleWizard.zip
(21.65 KiB) Downloaded 23 times
BoltCircleWizard.jpg
Vmax549
 
Posts: 1111
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Bolt Circle Wizard

Postby Dan911 » Fri Jun 15, 2018 2:28 pm

Hi Terry nice job! Since posting as learning templates I hope you don't mind me making a suggestion. When I first tried this wizard I got and Exception because I didn't have a "Gcodes" folder created in UCCNC that wizard is writing to. By adding code below to the beginning of macro will fix.

Dan

Code: Select all
string Path2 = Application.StartupPath + @"\Gcodes";
if (!System.IO.Directory.Exists(Path2)) { System.IO.Directory.CreateDirectory(Path2); }
Dan911
 
Posts: 374
Joined: Mon Oct 31, 2016 1:22 am
Location: USA

Re: Bolt Circle Wizard

Postby Vmax549 » Fri Jun 15, 2018 3:51 pm

Thanks Dan , Sometime I forget that others may use these. I would normally do that BUT I forgot to check it.

ALL suggestions are WELCOME ;)

(;-) TP
Vmax549
 
Posts: 1111
Joined: Sun Nov 22, 2015 3:25 am
Location: USA


Return to Conversational Wizards

Who is online

Users browsing this forum: No registered users and 2 guests

cron