CNC Lathe Info

While UCCNC does not currently have a TURN Modual Here is the place to discuss your wants and wishes for TURN

Re: CNC Lathe Info

Postby Spuds » Tue Feb 06, 2024 3:41 pm

andrej wrote:G43 Hx where x is tool number in the tool database works just fine in latest version which introduced lathe capabilities. Atleast for manual toolchange on a 4 tool turret. I measured all offsets against first (master) tool and can do multi tool work without any issues. The offsets in both X and Z are taken from the tool table in UCCNC and applied to the work coorddinates.


Very interesting .... I will try this !
Thank you :)
Spuds
 
Posts: 52
Joined: Wed May 08, 2019 8:35 pm

Previous

Return to UCCNC TURN (CNC Lathe)

Who is online

Users browsing this forum: No registered users and 3 guests