Turn software update?

While UCCNC does not currently have a TURN Modual Here is the place to discuss your wants and wishes for TURN

Re: Turn software update?

Postby asuratman » Sat Nov 05, 2022 12:26 am

What status on new turn software ? Big progress, it will be released soon ?
asuratman
 
Posts: 101
Joined: Sun Jan 28, 2018 1:50 pm

Re: Turn software update?

Postby ger21 » Sat Nov 05, 2022 12:42 pm

Software gets released when it's finished, not sooner. Every time someone asks when it will be released, it adds a 3 month delay. :lol:
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2414
Joined: Sat Sep 03, 2016 2:17 am

Re: Turn software update?

Postby cncdrive » Fri Nov 18, 2022 6:04 pm

We still working on the final testings and minor fixings in the new screen elements. Unfortunately it takes more time then I expected...
cncdrive
Site Admin
 
Posts: 4292
Joined: Tue Aug 12, 2014 11:17 pm

Re: Turn software update?

Postby Robertspark » Sun Nov 20, 2022 11:05 am

Image

uccnc is already cheap or cost effective, which is the other one you want?
Robertspark
 
Posts: 1886
Joined: Sat Sep 03, 2016 4:27 pm

Re: Turn software update?

Postby cncdrive » Thu Nov 24, 2022 2:30 am

Well yes, it is hard to supply all 3 options the same time.
Our priority is really on good and cost effective and trying to achive them as fast as possible, but these new functions especially the lathe functions are not easy to implement.
It is not coincident that most hobby CNC softwares do not even support the G95 (spindle speed based feedrate) and G96 (Constant surface speed) codes or if they do then they cannot even work together.
The UCCNC will even support close to realtime control of both using encoder feedback from the spindle motor.
It will also support the mentiond codes udsing the programmed spindle speed values if no spindle encoder or index sensor is attached.
So, we trying to do it fast, but it is more important for us to make these functions full featured.
And basically all lathe functions are already implemented, but testing and minor issue fixings are still ongoing,
cncdrive
Site Admin
 
Posts: 4292
Joined: Tue Aug 12, 2014 11:17 pm

Previous

Return to UCCNC TURN (CNC Lathe)

Who is online

Users browsing this forum: No registered users and 1 guest