Plug Inns

Post anything you want to discuss with others about the software.

Plug Inns

Postby naijin » Thu Jan 18, 2018 11:57 pm

Hi there, just a quick question, Mach 3 has plug inns for some peripherals and software on their web site, does UCCNC also have plug inns or do you use Mach 3 Plug Inns ?

Regards
Nick
naijin
 
Posts: 104
Joined: Mon Dec 04, 2017 11:24 pm

Re: Plug Inns

Postby ger21 » Fri Jan 19, 2018 12:28 am

UCCNC has it's own plugins. Several are already installed.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Plug Inns

Postby naijin » Fri Jan 19, 2018 9:28 am

Hi Ger21, thanks for the quick reply, guess I will find the plugins on their site.

Regards
naijin
 
Posts: 104
Joined: Mon Dec 04, 2017 11:24 pm

Re: Plug Inns

Postby A_Camera » Fri Jan 19, 2018 12:33 pm

But Mach3 plugins won't work in UCCNC and vice versa, UCCNC plugins won't work on Mach3, except the ones made for the CNC Drive motion controllers to enable using Mach3 with them and these can be downloaded from CNC Drive. UCCNC has plugins for some things, however, to use UCCNC you MUST have a motion controller made by CNC Drive. You can't use any other. The plugins available for UCCNC are for other type of peripherals, like VFD, auto levelling, 3D printer and so on. All requires that you have both UCCNC and one of their motion controllers plus a license. So which plugin are you interested in?
A_Camera
 
Posts: 638
Joined: Tue Sep 20, 2016 11:37 am

Re: Plug Inns

Postby cncdrive » Fri Jan 19, 2018 12:47 pm

Josef, one little correction: UCCNC plugins work also in demo mode of the UCCNC and for that no motion controller is required. For example the Modbus plugin can be useful even in demo mode.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Plug Inns

Postby A_Camera » Fri Jan 19, 2018 1:00 pm

cncdrive wrote:Josef, one little correction: UCCNC plugins work also in demo mode of the UCCNC and for that no motion controller is required. For example the Modbus plugin can be useful even in demo mode.

That is true. I forgot about that. Thanks for the correction.
A_Camera
 
Posts: 638
Joined: Tue Sep 20, 2016 11:37 am

Re: Plug Inns

Postby naijin » Thu Jan 25, 2018 12:09 am

Hi A_Camera, I was wondering if there is a plug in for the XHC wireless Pendant, and if anyone is using one, how is the performance and are there any problems??

Regards
Nick
naijin
 
Posts: 104
Joined: Mon Dec 04, 2017 11:24 pm


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 4 guests