Error in User Manual

Post anything you want to discuss with others about the software.

Error in User Manual

Postby ger21 » Sun Dec 24, 2017 4:08 pm

On Page 16 of the User Manual, Enable is labelled Enable port port & pin.
And this line was apparently copied from the Step Port & Pin, and should be removed.
Which is the physical output pin on the UC100 device for the step signal.
Gerry
UCCNC 2017 Screenset - http://www.thecncwoodworker.com/2017.html
ger21
 
Posts: 1190
Joined: Sat Sep 03, 2016 2:17 am

Re: Error in User Manual

Postby cncdrive » Thu Dec 28, 2017 4:05 pm

Thanks Gerry, I've corrected the errors now in the documentation.
cncdrive
Site Admin
 
Posts: 2366
Joined: Tue Aug 12, 2014 11:17 pm


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 3 guests