setting tool probe

Post anything you want to discuss with others about the software.

setting tool probe

Postby thegreatwaldo » Sun Dec 17, 2017 8:21 pm

I have a 42 mm high tool sensor. When I press the probe button the cutter comes down touches the switch pulls up comes down stops and then keeps going for about 27 mm. What am I doing wrong. Is there a setting to input the touch sensor height ? Help


Posts: 64
Joined: Tue Sep 06, 2016 8:28 pm

Re: setting tool probe

Postby cncdrive » Mon Dec 18, 2017 1:43 am

The probe button calls the M31 macro. The macro is coded in the M31 macro file in the UCCNC/Profiles/Macro_Yourprofilename/M31.txt.
Open the probing macro with a screen editor and you can then edit the macro freely.
Everything about the probing button action is coded in that macro like if it makes a single or dual probing movement, the probing feedrates, the retract distance etc.
Site Admin
Posts: 2366
Joined: Tue Aug 12, 2014 11:17 pm

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 3 guests