forum.cncdrive.com

I'm not sure whether this is related to the interpretation of the G-Code, the AXBB-E controller, or a configuration setting, but when my device tries to do smooth curves I get a distinct shuddering effect.
It only happens on things like text and small radius curves. I know the G-Code is not generating arcs, but a series of discrete small movements, but is there something I should be settings to persuade the router to track smoothly on the bends?

[youtube]https://youtu.be/5nbjzM52e9Q[/youtube]

Is there an obscure setting that helps resolve this?

Thanks,
Jason

Try increasing the error tolerance values in your CV settings.