UCCNC Load from Image function

Post anything you want to discuss with others about the software.

Re: UCCNC Load from Image function

Postby tau » Sat Mar 11, 2017 2:24 pm

Code ? Macro??
tau
 
Posts: 19
Joined: Sun Feb 26, 2017 8:06 pm

Re: UCCNC Load from Image function

Postby dezsoe » Sun Mar 12, 2017 5:01 pm

Do you generate GCode from the BMP file? Or you have generated bitmaps for the GCode files?
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: UCCNC Load from Image function

Postby A_Camera » Mon Mar 13, 2017 6:36 am

dezsoe wrote:Do you generate GCode from the BMP file? Or you have generated bitmaps for the GCode files?

Szia Dezsö. You can use F-Engrave to do that. It is extremely flexible and can do much more and is free.

http://www.scorchworks.com/Fengrave/fengrave.html
A_Camera
 
Posts: 638
Joined: Tue Sep 20, 2016 11:37 am

Re: UCCNC Load from Image function

Postby dezsoe » Mon Mar 13, 2017 10:06 am

A_Camera: Thank you for the link! Good program, I'll check it later.

Vmax549: Thank you! I only wanted to know if it reads GCode and displays it, or it only loads bitmaps.
dezsoe
 
Posts: 2049
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 13 guests