Page 1 of 1

Control UCCNC from a serial(RS232/USB) or a Telnet(TCP)

PostPosted: Fri Oct 14, 2022 5:15 pm
by kim@moltved.dk
Hi

Is there a way to control UCCNC from a serial(RS232/USB) or a Telnet(TCP).
As sending g-code to control the machine and ask for status and position?

Way I working on using my CNC, to work as a Pick and Place PNP machine. Adding a pick head like this (https://www.aliexpress.com/item/4000106040362.html) and some up and down camera, and the use openpnp for control.