Fusion360 Post processor with probing functions

Post anything you want to discuss with others about the software.

Fusion360 Post processor with probing functions

Postby Delco » Sat Jun 20, 2020 4:23 am

Does anyone have a working post processor to use the fusion360 probing functions ?

I have found this website that has a mach3 post processor but it doesnt work with uccnc.
http://www.mlmsolutions.biz/fusion_post ... robing.php
Delco
 
Posts: 354
Joined: Tue Apr 02, 2019 4:23 am

Re: Fusion360 Post processor with probing functions

Postby spinelli » Sun Jun 28, 2020 3:58 am

This is on my wishlist too. I use a Drewtronics probe and would love to automate the probing process.
spinelli
 
Posts: 1
Joined: Sun Jun 28, 2020 3:49 am

Re: Fusion360 Post processor with probing functions

Postby cncdrive » Sun Jun 28, 2020 8:32 pm

There is a nice probing screen in the UCCNC development version, you can use that.
Or you could send an email to Autodesk, ask them to make their post processor compatible.
I'm sure they will if many of you guys will ask them.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: Fusion360 Post processor with probing functions

Postby CL_MotoTech » Wed Jul 01, 2020 7:00 pm

Honest question about this, I have never used CAM to operate the probing operations, what is the benefit of doing this in CAM?
CL_MotoTech
 
Posts: 112
Joined: Thu Feb 15, 2018 3:50 pm

Re: Fusion360 Post processor with probing functions

Postby Delco » Thu Jul 02, 2020 8:50 am

Can be used to check you have machined to the correct dimension , cycles to check for tool breakage , when finding the centre of a part distances to travel are set in cam not manually .
Delco
 
Posts: 354
Joined: Tue Apr 02, 2019 4:23 am


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 3 guests