UCCNC test releases posted in this thread

Post anything you want to discuss with others about the software.

UCCNC test releases posted in this thread

Postby cncdrive » Tue Sep 27, 2016 11:18 pm

UCCNC version 1.2023 version available for testing: http://www.cncdrive.com/UCCNC/setup_1.2023.exe

Bugs fixed:

- Timeout parameter did not save in the Modbusmaster plugin, problem fixed.
- Autoleveler plugin jogdisable issue was fixed by the developer, plugin updated.
- Probe did not work in some cases, problem fixed.
- Softlimits parameters did not download always properly, problem fixed.
- Plugininterface Getbuttonstate missing function was added.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: UCCNC version 1.2023 ready for testing

Postby Battwell » Wed Sep 28, 2016 12:46 am

I was going to email you re some missed probes! Will install today
Uc300eth on router and mill.
UK uccnc powered machine sales. https://cncrouter.uk/atc-cnc-routers.htm
Automateanything/duzzit cnc/mercury cnc
Battwell
 
Posts: 819
Joined: Sun Sep 25, 2016 7:39 pm
Location: South Wales. Uk

Re: UCCNC version 1.2023 ready for testing

Postby A_Camera » Wed Sep 28, 2016 11:22 am

Thank you. Will download and test it as soon as I can.

No news about radius compensation(G40, G41, G42) and Mach3 plugin for UC300ETH?
A_Camera
 
Posts: 638
Joined: Tue Sep 20, 2016 11:37 am

Re: UCCNC version 1.2023 ready for testing

Postby cncdrive » Wed Sep 28, 2016 1:12 pm

Radius compensation will probably take months to be fully implemented and tested, it is not a weekend project, it is really complex stuff.
The Mach3 plugin for the UC300ETH targeted to be done by the 15.10 .. hopefully we can finish by the date.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: UCCNC version 1.2023 ready for testing

Postby A_Camera » Wed Sep 28, 2016 1:25 pm

Thanks for the answer. Yes, I know radius compensation is not just a small fix, but thank you for the updates anyway. In the meantime, thank you for the quick fix of the Modbus timeout.
A_Camera
 
Posts: 638
Joined: Tue Sep 20, 2016 11:37 am


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 20 guests

cron