forum.cncdrive.com • View topic - Keyboard Jog Speed

Page 1 of 1

Keyboard Jog Speed

Posted: Sat Nov 03, 2018 9:28 am

by DWhiteR1

Hi,
Why is my Keyboard Jog speed only 10% of the setup velocity?

Velocity in Setup is 20000.

Keyboard Jog Maxes out at 2000

Regards,
Dean

Re: Keyboard Jog Speed

Posted: Sat Nov 03, 2018 9:52 am

by dezsoe

In continous jog mode you set the jog speed with the JRO on the jog screen. In step mode use the F command to set the feed rate.

Re: Keyboard Jog Speed

Posted: Sat Nov 03, 2018 10:50 am

by ger21

In the Jog Flyout, your Jog Feed % is set to 10.

Re: Keyboard Jog Speed

Posted: Sat Nov 03, 2018 11:39 am

by DWhiteR1

Thank you, Changed the jog speed percentage
Much better now.

Dean