Gcodes I miss using UCCNC

Post anything you want to discuss with others about the software.

Re: Gcodes I miss using UCCNC

Postby ger21 » Sat Oct 22, 2016 7:48 pm

I just need G41/G42.
Have no use at all for the others you mentioned.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: Gcodes I miss using UCCNC

Postby A_Camera » Mon Oct 24, 2016 8:39 am

ger21 wrote:I just need G41/G42.
Have no use at all for the others you mentioned.

+1
A_Camera
 
Posts: 638
Joined: Tue Sep 20, 2016 11:37 am

Re: Gcodes I miss using UCCNC

Postby dammogreen » Wed Feb 07, 2018 10:39 pm

Vmax549 wrote:Here are some of the gcodes I still miss when running UCCNC. NOT in any specific order

Parametric Gcoding as G1 X[#1 * 2.035] where teh axis call is a calculation or X- [#1*2.035] where teh - is a directional call

What things are you guys missing ??????

(;-) TP



Yeah I wish something like G1 Z[#1+1.5] was valid. I am new to UCCNC , but there is no way to add say an `offset like this "in line"....I would have to do it like:
#1=2.5 (for example)
#2=[#1+1.5]
G1 Z#2
dammogreen
 
Posts: 61
Joined: Thu Jan 11, 2018 10:24 pm


Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: No registered users and 16 guests

cron