Page 1 of 1

Selling a UC100

PostPosted: Tue Aug 07, 2018 5:45 am
by Greolt
Because the UCCNC software license is tied to the actual hardware of a UC100 (in this case) unlike most coomon software licenses.

I presume it is OK to pass on, or sell, a UC100 with the atached UCCNC software license.

However I do not wish to do the wrong thing and thought best to check first.

Re: Selling a UC100

PostPosted: Tue Aug 07, 2018 5:53 am
by cncdrive
Yes, you can sell them together. The name on the license keys do not matter for us, because the software is locked to the serial number of the motion controller anyways, so the UC100 acts as a hardware dongle/key also.
Just please do not sell the controller on our forum, because this is a tech support forum and not a sales forum.
Thank you for your understanding about this.

Re: Selling a UC100

PostPosted: Tue Aug 07, 2018 6:35 am
by Greolt
No problem.

Thanks for the response.