forum.cncdrive.com

What you have is definately a fake Chinese device.
You will have to contact the manufacturer for support, we don't know how it works and we not supporting illegal copies, sorry.

Problem installing UC100 on W10.

after some time spending on the installation of the UC100 on my system, I read somewhere that you must first install Framework 2.0.
So to help other people not spending time on it, I put this info here.
after installing the Framework 2.0 the interface and reinstall the drivers all works perfect.
Kind regards
Roger

Only older UCCNC versions required the .net framework 2.0 and for those you have to enable the .net framework 3.5 which included the framework 2.0
The newer UCCNC versions require the .net 4.0 which is compatible with all .net 4.x versions and Windows 10 have those installed, it is part of the operating system, so for these UCCNC versions you do not have to install any .net frameworks.

https://smile.amazon.de/USB-Parallel-Konverterkabel-CNC-1125-kHz-USB-Controller-Mach3-UC100-Hochgeschwindigkeitsadapter-Einfaches/dp/B08GYKN75V/ref=sr_1_1?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1JQXXHM0D3Q3F&keywords=USB+to+Parallel+Cable+Adapter+Plastic+USB+Controller+for+Mach3+UC100+High%E2%80%91Speed+Adapter%2C+Plug+%26+Play&qid=1641222305&sprefix=usb+to+parallel+cable+adapter+plastic+usb+controller+for+mach3+uc100+high+speed+adapter+plug+%26+play%2Caps%2C71&sr=8-1

That should be a fake too

Yes, thats fake. These are not UC100 motion controllers, but some Chinese motion controllers which works only with a cracked version of Mach3.
Appearantly the price of this fake one is close to the price of the orignal UC100.

Good morning, exactly the same eBay fake come to sell on Amazon as well, like this I have started my way with the UCCNC device. The first step and making wrong. (retur/refund) and go to the original.