Am I do someting wrong with tool measuring?

[bhdavis]

Oops....sorry Jerry. Yes I did see it. I did a bit of digging to find out what

"Where does the tloRef value come from?"

means as it is a bit over my head. We were on the road coming home from VT today though so after a bit of digging yesterday afternoon up there I had to put this on hold until tomorrow.

BH

[RsX]

Interesting observation. I've just figured the first plunge is moving fast enough to push the switch past the trigger point. However I will take a closer look at this.

This shouldn't be a problem, the first probe is designed to speed up the process and overshoot the target.

"Where does the tloRef value come from?"

They should be in the ".pro" file, so post here the content of the .pro profile file. That was a mouthful

[bhdavis]

BHD3.pro pasted below.

[Screensetsettings]
mainscreenfilename=BHD3_Screen
splashscreen=0
[axessettingscontrolX]
Axisenabled=True
Stepportnumber=1
Steppinnumber=2
Steppinnegate=False
Dirpinnumber=3
Dirportnumber=1
Dirpinnegate=True
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=11
Limitminuspinnegate=True
Limitpluspinnumber=11
Limitpluspinnegate=True
Homepinnumber=11
Homepinnegate=True
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=100
Homingspeeddown=250
Stepsperunit=10401.1800230434
Velocity=545
Acceleration=25
Softlimitpositive=96.5
Softlimitnegative=-1.25
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=1
Limitminusportnumber=1
Limitplusportnumber=1
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=1.375
[axessettingscontrolY]
Axisenabled=True
Stepportnumber=1
Steppinnumber=4
Steppinnegate=False
Dirpinnumber=5
Dirportnumber=1
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=12
Limitminuspinnegate=True
Limitpluspinnumber=12
Limitpluspinnegate=True
Homepinnumber=12
Homepinnegate=True
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=100
Homingspeeddown=250
Stepsperunit=10424.1567360129
Velocity=545
Acceleration=25
Softlimitpositive=49
Softlimitnegative=-1.75
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=1
Limitminusportnumber=1
Limitplusportnumber=1
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=1.8125
[axessettingscontrolZ]
Axisenabled=True
Stepportnumber=1
Steppinnumber=6
Steppinnegate=False
Dirpinnumber=7
Dirportnumber=1
Dirpinnegate=True
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=11
Limitminuspinnegate=True
Limitpluspinnumber=13
Limitpluspinnegate=True
Homepinnumber=13
Homepinnegate=True
Homedirectionpositive=True
Homeautozero=True
Homingvalue=0
Homingspeedup=15
Homingspeeddown=250
Stepsperunit=15624.4607967521
Velocity=50
Acceleration=10
Softlimitpositive=3
Softlimitnegative=-8
Backlashenable=False
Backlashdistance=0
Slaveaxis=None
Homeportnumber=1
Limitminusportnumber=2
Limitplusportnumber=1
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=-0.25
[axessettingscontrolA]
Axisenabled=False
Stepportnumber=0
Steppinnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
Dragknifeenabled=False
Dragknifestopatangle=0
Dragkniferetractatangle=0
Dragkniferetractheight=0
Dragknifemovebackfeedrate=0
Dragknifepulloutfeedrate=0
Rotaryaxis=False
Rotaryrollover=False
[axessettingscontrolB]
Axisenabled=False
Stepportnumber=0
Steppinnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
Rotaryaxis=False
Rotaryrollover=False
[axessettingscontrolC]
Axisenabled=False
Steppinnumber=0
Stepportnumber=0
Steppinnegate=False
Dirpinnumber=0
Dirportnumber=0
Dirpinnegate=False
Enapinnumber=0
Enaportnumber=0
Enapinnegate=False
Limitminuspinnumber=0
Limitminuspinnegate=False
Limitpluspinnumber=0
Limitpluspinnegate=False
Homepinnumber=0
Homepinnegate=False
Homedirectionpositive=False
Homeautozero=True
Homingvalue=0
Homingspeedup=500
Homingspeeddown=250
Stepsperunit=200
Velocity=2000
Acceleration=200
Softlimitpositive=0
Softlimitnegative=0
Backlashenable=False
Backlashdistance=0
Homeportnumber=0
Limitminusportnumber=0
Limitplusportnumber=0
Compaccel=240
Enabledelay=0
Currhilowpinnumber=0
Currhilowportnumber=0
Currhilowpinnegate=False
Homebackoff=0
Rotaryaxis=False
Rotaryrollover=False
[Spindlesetupsettings]
IsSpindleinPWMMode=True
SpindlePWMoutpin=14
SpindlePWMoutpinnegate=False
SpindlePWMdirpin=16
SpindlePWMdirpinnegate=False
SpindlePWMfrequency=65
SpindlePWMminpercent=0
SpindlePWMmaxpercent=100
Spindlesteppin=0
Spindlesteppinnegate=False
Spindledirpin=0
Spindledirpinnegate=False
Spindlestepsperunit=500
Spindleacceleration=200
Spindleminvelocity=1
Spindlemaxvelocity=21000
Spindlerelaysenabled=False
M3relaypin=14
M3relaypinnegate=False
M4relaypin=16
M4relaypinnegate=False
M3ondelay=1
M3offdelay=1
M4ondelay=1
M4offdelay=1
Floodmistrelaysenabled=True
M7relaypin=1
M7relaypinnegate=False
M8relaypin=0
M8relaypinnegate=False
M7ondelay=0
M8ondelay=0
M9delay=1
SpindlePWMoutport=1
SpindlePWMdirport=1
Spindlestepport=0
Spindledirport=0
M3relayport=1
M4relayport=1
M7relayport=3
M8relayport=0
EncoderApin=0
EncoderAport=0
EncoderBpin=0
EncoderBport=0
Encoderreversedirection=False
EncoderPPR=400
Pulleyratio1=1
Pulleyminvel1=1
Pulleymaxvel1=1
Pulleyinuse=1
Pulleyratio2=1
Pulleyminvel2=1
Pulleymaxvel2=1
Pulleyratio3=1
Pulleyminvel3=1
Pulleymaxvel3=1
Pulleyratio4=1
Pulleyminvel4=1
Pulleymaxvel4=1
Pulleyratio5=1
Pulleyminvel5=1
Pulleymaxvel5=1
Pulleyratio6=1
Pulleyminvel6=1
Pulleymaxvel6=1
Pulleyratio7=1
Pulleyminvel7=1
Pulleymaxvel7=1
Pulleyratio8=1
Pulleyminvel8=1
Pulleymaxvel8=1
Pulleyratio9=1
Pulleyminvel9=1
Pulleymaxvel9=1
Pulleyratio10=1
Pulleyminvel10=1
Pulleymaxvel10=1
Pulleyratio11=1
Pulleyminvel11=1
Pulleymaxvel11=1
Pulleyratio12=1
Pulleyminvel12=1
Pulleymaxvel12=1
Pulleyratio13=1
Pulleyminvel13=1
Pulleymaxvel13=1
Pulleyratio14=1
Pulleyminvel14=1
Pulleymaxvel14=1
Pulleyratio15=1
Pulleyminvel15=1
Pulleymaxvel15=1
Usepulleys=False
[Generalsettings]
Constantvelocitymode=True
Stopatangle=89
Lookaheadlines=300
Softlimitsenable=False
Homesequence1=Z
Homesequence2=X
Homesequence3=Y
Homesequence4=None
Homesequence5=None
Homesequence6=None
Linearerror=0.001
Cornerserror=0.001
USBbuffersize=0.1
POSDROsdigits=4
Doontoolchange=2
MaxLinearaddlenght=1
MaxLinearunificationlenght=2
Kernelfreq=0
SafeZ=2
G73_backoff=0.4
Maximisescreenonstartup=True
Dwellinseconds=True
Runmodewhenunknowngcode=0
Softlimitsgcodeprecheck=True
Precompilemacrosonstartup=False
Arcradiustolerance=0.1
ResetG68onfileload=False
ResetG51onfileload=False
ResetG94onfileload=False
Debounce=0
DebounceTHC=0
DebounceHome=0
G41G42roundjoints=False
CheckHomeonCycleStart=False
ResetDereferenceHomes=False
DebounceProbe1=0
DebounceProbe2=0
[IOsetupsettings]
Estoppinnumber=10
Estoppinnegate=True
Probepinnumber=12
Probepinnegate=True
Chargepumppinnumber=17
Chargepumppinnegate=True
Chargepumplasermodeon=False
Chargepumpalwayson=False
CurrentHiLopinnumber=0
CurrentHiLopinnegate=False
Indexpinnumber=0
Indexprescaler=1
THCenable=False
THConpin=0
THConpinnegate=False
THCuppin=0
THCuppinnegate=False
THCdownpin=0
THCdownpinnegate=False
THCmin=0
THCmax=0
THCfeed=0.01
THCalwayson=False
THCondelay=0
Estopportnumber=1
Chargepumpportnumber=2
CurrentHiLoportnumber=0
Indexportnumber=0
Probeportnumber=2
THConport=0
THCupport=0
THCdownport=0
MPG1pinA=0
MPG1pinB=0
MPG1portA=0
MPG1portB=0
MPG1prescaler=1
MPG1filter=10
MPG1speedmultiplier=10
FROchannel=0
SROchannel=0
JROchannel=0
FROminpercent=0
FROmaxpercent=0
SROminpercent=0
SROmaxpercent=0
JROminpercent=0
JROmaxpercent=0
SPPWMchannel=0
Ana1invarnum=0
Ana2invarnum=0
Ana1outvarnum=0
Ana2outvarnum=0
MPG1attachtoJRO=False
Laseroutputpinnumber=0
Laseroutputportnumber=0
Laseroutputpinnegate=False
THCantidiveenable=False
THCantidivepercent=0
Plasmapierceheight=0
Chargepump2pinnumber=0
Chargepump2portnumber=0
Chargepump2pinnegate=False
Digitialsyncoutputpinnumber1=0
Digitialsyncoutputportnumber1=0
Digitialsyncoutputpinnegate1=False
Digitialsyncoutputpinnumber2=0
Digitialsyncoutputportnumber2=0
Digitialsyncoutputpinnegate2=False
Digitialsyncoutputpinnumber3=0
Digitialsyncoutputportnumber3=0
Digitialsyncoutputpinnegate3=False
Digitialsyncoutputpinnumber4=0
Digitialsyncoutputportnumber4=0
Digitialsyncoutputpinnegate4=False
Digitialsyncoutputpinnumber5=0
Digitialsyncoutputportnumber5=0
Digitialsyncoutputpinnegate5=False
Digitialsyncoutputpinnumber6=0
Digitialsyncoutputportnumber6=0
Digitialsyncoutputpinnegate6=False
Digitialsyncoutputpinnumber7=0
Digitialsyncoutputportnumber7=0
Digitialsyncoutputpinnegate7=False
Digitialsyncoutputpinnumber8=0
Digitialsyncoutputportnumber8=0
Digitialsyncoutputpinnegate8=False
Digitialsyncoutputpinnumber9=0
Digitialsyncoutputportnumber9=0
Digitialsyncoutputpinnegate9=False
Digitialsyncoutputpinnumber10=0
Digitialsyncoutputportnumber10=0
Digitialsyncoutputpinnegate10=False
Probepin2number=10
Probeport2number=2
Probepin2negate=False
THCdelayenable=False
THCenableoutpin=0
THCenableoutport=0
THCenableoutpinnegate=False
THCantidiveoutpin=0
THCantidiveoutport=0
THCantidiveoutpinnegate=False
THCantidownoutpin=0
THCantidownoutport=0
THCantidownoutpinnegate=False
THCantidownenable=False
Ana3invarnum=0
Ana4invarnum=0
Ana3outvarnum=0
Ana4outvarnum=0
[Appearancesetupsettings]
2DTLCmarker=True
Viewerundonepathcolor=3381759
Viewerdonepathcolor=-5374161
Viewerrapidpathcolor=16711680
ViewerTCPmarkercolor=16776960
ViewerBackgroundcolor=0
Viewerboundariescolor=16777215
GVgcodecolors=16777215
GVmcodecolors=-233
GVscodecolors=-32513
GVfcodecolors=-21931
GVbackgroundcolor=-12698050
GVactualcodecolor=-16777216
GVactualcodemidlinescolor=-16777216
GVnotinterpretedcodecolor=16711680
GVaxiswordcolor=-8323328
GVcoordinatecolor=-9250052
TCPcone=True
TCPcross=False
RotateTCPwithplaneselection=True
Showzeromark=True
Zeromarkcolor=-16711681
DROwarningcolor=-65536
rotationpointmarkcolor=-65536
Showrotationmark=True
Showtoolpathboundaries=True
Highlightcolor=-1
radiusoffsetpathcolor=-13675
Showmessageonsoftlimits=True
ValidateTextfieldsonEnteronly=False
Disablejogpanelautopopup=True
ShowRcompanalysisonfileload=True
Disablevirtualmousemode=False
Disabletoolpathview=False
ShowtoolpathZzeroplate=False
ZplateXstart=0
ZplateYstart=0
ZplateXextents=97
ZplateYextents=52
ZplateZposition=0
ZplateZpositiononbottom=False
ZplatePlateOpacity=25
ZplateColor=-65536
ZplateXgrid=10
ZplateYgrid=10
ZplateGridOpacity=25
ZplateGridColor=-1
ZplateShowSoftlimits=True
ZplateSoftlimitsColor=-16711936
ZplateSoftlimitsOpacity=100
Savetooltableonclosing=True
Dontresettoolpathviewonreload=False
checkboxfillcolor=-2147483648
Showtoolpathdimensions=True
Dontcompressimages=False
tooldimscolor=-16711936
tooldimsaxiscolor=False
[Tooltablevalues]
TooloffsetZ0=0
TooloffsetZ1=-1.56351
TooloffsetZ2=-1.067109
TooloffsetZ3=-1.600567
TooloffsetZ4=-1.884545
TooloffsetZ5=-1.215338
TooloffsetZ6=-0.757466
TooloffsetZ7=0
TooloffsetZ8=0
TooloffsetZ9=-1.597367
TooloffsetZ10=0
TooloffsetZ11=0
TooloffsetZ12=0
TooloffsetZ13=0
TooloffsetZ14=0
TooloffsetZ15=0
TooloffsetZ16=0
TooloffsetZ17=0
TooloffsetZ18=0
TooloffsetZ19=0
TooloffsetZ20=0
TooloffsetZ21=0
TooloffsetZ22=0
TooloffsetZ23=0
TooloffsetZ24=0
TooloffsetZ25=0
TooloffsetZ26=0
TooloffsetZ27=0
TooloffsetZ28=0
TooloffsetZ29=0
TooloffsetZ30=0
TooloffsetZ31=0
TooloffsetZ32=0
TooloffsetZ33=0
TooloffsetZ34=0
TooloffsetZ35=0
TooloffsetZ36=0
TooloffsetZ37=0
TooloffsetZ38=0
TooloffsetZ39=0
TooloffsetZ40=0
TooloffsetZ41=0
TooloffsetZ42=0
TooloffsetZ43=0
TooloffsetZ44=0
TooloffsetZ45=0
TooloffsetZ46=0
TooloffsetZ47=0
TooloffsetZ48=0
TooloffsetZ49=0
TooloffsetZ50=0
TooloffsetZ51=0
TooloffsetZ52=0
TooloffsetZ53=0
TooloffsetZ54=0
TooloffsetZ55=0
TooloffsetZ56=0
TooloffsetZ57=0
TooloffsetZ58=0
TooloffsetZ59=0
TooloffsetZ60=0
TooloffsetZ61=0
TooloffsetZ62=0
TooloffsetZ63=0
TooloffsetZ64=0
TooloffsetZ65=0
TooloffsetZ66=0
TooloffsetZ67=0
TooloffsetZ68=0
TooloffsetZ69=0
TooloffsetZ70=0
TooloffsetZ71=0
TooloffsetZ72=0
TooloffsetZ73=0
TooloffsetZ74=0
TooloffsetZ75=0
TooloffsetZ76=0
TooloffsetZ77=0
TooloffsetZ78=0
TooloffsetZ79=0
TooloffsetZ80=0
TooloffsetZ81=0
TooloffsetZ82=0
TooloffsetZ83=0
TooloffsetZ84=0
TooloffsetZ85=0
TooloffsetZ86=0
TooloffsetZ87=0
TooloffsetZ88=0
TooloffsetZ89=0
TooloffsetZ90=0
TooloffsetZ91=0
TooloffsetZ92=0
TooloffsetZ93=0
TooloffsetZ94=0
TooloffsetZ95=0
TooloffsetZ96=0
ToolDia0=0
ToolDia1=0
ToolDia2=0
ToolDia3=0
ToolDia4=0
ToolDia5=0
ToolDia6=0
ToolDia7=0
ToolDia8=0
ToolDia9=0
ToolDia10=0
ToolDia11=0
ToolDia12=0
ToolDia13=0
ToolDia14=0
ToolDia15=0
ToolDia16=0
ToolDia17=0
ToolDia18=0
ToolDia19=0
ToolDia20=0
ToolDia21=0
ToolDia22=0
ToolDia23=0
ToolDia24=0
ToolDia25=0
ToolDia26=0
ToolDia27=0
ToolDia28=0
ToolDia29=0
ToolDia30=0
ToolDia31=0
ToolDia32=0
ToolDia33=0
ToolDia34=0
ToolDia35=0
ToolDia36=0
ToolDia37=0
ToolDia38=0
ToolDia39=0
ToolDia40=0
ToolDia41=0
ToolDia42=0
ToolDia43=0
ToolDia44=0
ToolDia45=0
ToolDia46=0
ToolDia47=0
ToolDia48=0
ToolDia49=0
ToolDia50=0
ToolDia51=0
ToolDia52=0
ToolDia53=0
ToolDia54=0
ToolDia55=0
ToolDia56=0
ToolDia57=0
ToolDia58=0
ToolDia59=0
ToolDia60=0
ToolDia61=0
ToolDia62=0
ToolDia63=0
ToolDia64=0
ToolDia65=0
ToolDia66=0
ToolDia67=0
ToolDia68=0
ToolDia69=0
ToolDia70=0
ToolDia71=0
ToolDia72=0
ToolDia73=0
ToolDia74=0
ToolDia75=0
ToolDia76=0
ToolDia77=0
ToolDia78=0
ToolDia79=0
ToolDia80=0
ToolDia81=0
ToolDia82=0
ToolDia83=0
ToolDia84=0
ToolDia85=0
ToolDia86=0
ToolDia87=0
ToolDia88=0
ToolDia89=0
ToolDia90=0
ToolDia91=0
ToolDia92=0
ToolDia93=0
ToolDia94=0
ToolDia95=0
ToolDia96=0
Slot1=0
Description1=
Type1=
Material1=
Slot2=0
Description2=
Type2=
Material2=
Slot3=0
Description3=
Type3=
Material3=
Slot4=0
Description4=
Type4=
Material4=
Slot5=0
Description5=
Type5=
Material5=
Slot6=0
Description6=
Type6=
Material6=
Slot7=0
Description7=
Type7=
Material7=
Slot8=0
Description8=
Type8=
Material8=
Slot9=0
Description9=
Type9=
Material9=
Slot10=0
Description10=
Type10=
Material10=
Slot11=0
Description11=
Type11=
Material11=
Slot12=0
Description12=
Type12=
Material12=
Slot13=0
Description13=
Type13=
Material13=
Slot14=0
Description14=
Type14=
Material14=
Slot15=0
Description15=
Type15=
Material15=
Slot16=0
Description16=
Type16=
Material16=
Slot17=0
Description17=
Type17=
Material17=
Slot18=0
Description18=
Type18=
Material18=
Slot19=0
Description19=
Type19=
Material19=
Slot20=0
Description20=
Type20=
Material20=
Slot21=0
Description21=
Type21=
Material21=
Slot22=0
Description22=
Type22=
Material22=
Slot23=0
Description23=
Type23=
Material23=
Slot24=0
Description24=
Type24=
Material24=
Slot25=0
Description25=
Type25=
Material25=
Slot26=0
Description26=
Type26=
Material26=
Slot27=0
Description27=
Type27=
Material27=
Slot28=0
Description28=
Type28=
Material28=
Slot29=0
Description29=
Type29=
Material29=
Slot30=0
Description30=
Type30=
Material30=
Slot31=0
Description31=
Type31=
Material31=
Slot32=0
Description32=
Type32=
Material32=
Slot33=0
Description33=
Type33=
Material33=
Slot34=0
Description34=
Type34=
Material34=
Slot35=0
Description35=
Type35=
Material35=
Slot36=0
Description36=
Type36=
Material36=
Slot37=0
Description37=
Type37=
Material37=
Slot38=0
Description38=
Type38=
Material38=
Slot39=0
Description39=
Type39=
Material39=
Slot40=0
Description40=
Type40=
Material40=
Slot41=0
Description41=
Type41=
Material41=
Slot42=0
Description42=
Type42=
Material42=
Slot43=0
Description43=
Type43=
Material43=
Slot44=0
Description44=
Type44=
Material44=
Slot45=0
Description45=
Type45=
Material45=
Slot46=0
Description46=
Type46=
Material46=
Slot47=0
Description47=
Type47=
Material47=
Slot48=0
Description48=
Type48=
Material48=
Slot49=0
Description49=
Type49=
Material49=
Slot50=0
Description50=
Type50=
Material50=
Slot51=0
Description51=
Type51=
Material51=
Slot52=0
Description52=
Type52=
Material52=
Slot53=0
Description53=
Type53=
Material53=
Slot54=0
Description54=
Type54=
Material54=
Slot55=0
Description55=
Type55=
Material55=
Slot56=0
Description56=
Type56=
Material56=
Slot57=0
Description57=
Type57=
Material57=
Slot58=0
Description58=
Type58=
Material58=
Slot59=0
Description59=
Type59=
Material59=
Slot60=0
Description60=
Type60=
Material60=
Slot61=0
Description61=
Type61=
Material61=
Slot62=0
Description62=
Type62=
Material62=
Slot63=0
Description63=
Type63=
Material63=
Slot64=0
Description64=
Type64=
Material64=
Slot65=0
Description65=
Type65=
Material65=
Slot66=0
Description66=
Type66=
Material66=
Slot67=0
Description67=
Type67=
Material67=
Slot68=0
Description68=
Type68=
Material68=
Slot69=0
Description69=
Type69=
Material69=
Slot70=0
Description70=
Type70=
Material70=
Slot71=0
Description71=
Type71=
Material71=
Slot72=0
Description72=
Type72=
Material72=
Slot73=0
Description73=
Type73=
Material73=
Slot74=0
Description74=
Type74=
Material74=
Slot75=0
Description75=
Type75=
Material75=
Slot76=0
Description76=
Type76=
Material76=
Slot77=0
Description77=
Type77=
Material77=
Slot78=0
Description78=
Type78=
Material78=
Slot79=0
Description79=
Type79=
Material79=
Slot80=0
Description80=
Type80=
Material80=
Slot81=0
Description81=
Type81=
Material81=
Slot82=0
Description82=
Type82=
Material82=
Slot83=0
Description83=
Type83=
Material83=
Slot84=0
Description84=
Type84=
Material84=
Slot85=0
Description85=
Type85=
Material85=
Slot86=0
Description86=
Type86=
Material86=
Slot87=0
Description87=
Type87=
Material87=
Slot88=0
Description88=
Type88=
Material88=
Slot89=0
Description89=
Type89=
Material89=
Slot90=0
Description90=
Type90=
Material90=
Slot91=0
Description91=
Type91=
Material91=
Slot92=0
Description92=
Type92=
Material92=
Slot93=0
Description93=
Type93=
Material93=
Slot94=0
Description94=
Type94=
Material94=
Slot95=0
Description95=
Type95=
Material95=
Slot96=0
Description96=
Type96=
Material96=
[Workoffset_G54]
WorkoffsetX=5.00001
WorkoffsetY=5.000021
WorkoffsetZ=-7.031751
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G55]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G56]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G57]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G58]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Workoffset_G59]
WorkoffsetX=0
WorkoffsetY=0
WorkoffsetZ=0
WorkoffsetA=0
WorkoffsetB=0
WorkoffsetC=0
[Machinecoords]
MachinecoordsX=0
MachinecoordsY=0
MachinecoordsZ=0
MachinecoordsA=0
MachinecoordsB=0
MachinecoordsC=0
[Tooloffsetcoords]
TooloffsetZ=0
[Systemmessages]
Message0=Valid license key was not found! Application will run in demo mode!
Message1=Firmware update done!
Message2=No UC100 connection was found! Application will run in demo mode!
Message3=Firmware update in progress! Please wait and do not close the application...
Message4=The application lost the connection with the motion controller device. [nl] Check the connection. The application is closing now! [nl] Save offsets?
Message5=A machine axis position software limit was reached. The axis was now stopped.
Message6=The reset logic of the software is active! [nl] Remove the reset condition with pressing the blinking reset button on the screen. [nl] If the reset condition cannot be removed can be due to an external e-stop button is pressed in or a limit switch on the machine tool is active. [nl] Please check the Diagnostics page for the input signals condition.
Message7=The current job workspace is out of the set software limits.[nl] Adjust the softlimits to fit the job extents or disable the softlimits.
Message8=The axis is disabled. To calibrate this axis enable the axis first.
Message9=An internal error occured. The application is closing now.
Message10=Enter a valid distance in absolute value!
Message11=The calculated steps per value was saved.
Message12=Please enter valid data.
Message13=Active fixture:
Message14=Are you sure you want to close?
Message15=
Message16=
Message17=
Message18=
Message19=
Message20=
Message21=
Message22=
Message23=
Message24=
Message25=
Message26=
Message27=The Default profile cannot be deleted!
Message28=File error.Could not delete the profile's macro library!
Message29=Do you really want to delete the profile :
Message30=File error.Could not copy default macros to profile!
Message31=was loaded!
Message32=The axis calibration makes a measurement to calibrate the steps per units resolution value for the machine axis. To abort and close this window press the cancel button.
Message33=Mark the current position of the machine axis. Set the distance and the feedrate on this page and press the OK button to make a movement.
Message34=Measure the travel distance on the machine axis from the previously marked point to the current point. Type the measured value to the field below and press OK.
Message35=The new steps per value was calculated and written to the below field. To save the new value press OK. The process is then finished.
Message36=Switch spindle on first
Message37=Move Z-axis first to safeZ height:
Message38=Make movement with safeZ to:
Message39=Start position(Units):
Message40=Actual steps per Unit:
Message41=Distance to move(Units):
Message42=Feed rate(Units/min):
Message43=Distance measured(Units):
Message44=Steps per Units calculated value:
Message45=The software limits is lower than the safeZ height. Execute the command anyways?
Message46=was created!
[Hotkeysettings]
Keycode1=39
Buttoncode1=147
Keycode2=37
Buttoncode2=148
Keycode3=38
Buttoncode3=149
Keycode4=40
Buttoncode4=150
Keycode5=33
Buttoncode5=151
Keycode6=34
Buttoncode6=152
Keycode7=45
Buttoncode7=153
Keycode8=46
Buttoncode8=154
Keycode9=81
Buttoncode9=155
Keycode10=65
Buttoncode10=156
Keycode11=87
Buttoncode11=157
Keycode12=83
Buttoncode12=158
Keycode13=27
Buttoncode13=130
Keycode14=0
Buttoncode14=0
Keycode15=0
Buttoncode15=0
Keycode16=0
Buttoncode16=0
Keycode17=0
Buttoncode17=0
Keycode18=0
Buttoncode18=0
Keycode19=0
Buttoncode19=0
Keycode20=0
Buttoncode20=0
Keycode21=0
Buttoncode21=0
Keycode22=0
Buttoncode22=0
Keycode23=0
Buttoncode23=0
Keycode24=0
Buttoncode24=0
Keycode25=0
Buttoncode25=0
Keycode26=0
Buttoncode26=0
Keycode27=0
Buttoncode27=0
Keycode28=0
Buttoncode28=0
Keycode29=0
Buttoncode29=0
Keycode30=0
Buttoncode30=0
Keycode31=0
Buttoncode31=0
Keycode32=0
Buttoncode32=0
Keycode33=0
Buttoncode33=0
Keycode34=0
Buttoncode34=0
Keycode35=0
Buttoncode35=0
Keycode36=0
Buttoncode36=0
Keycode37=0
Buttoncode37=0
Keycode38=0
Buttoncode38=0
Keycode39=0
Buttoncode39=0
Keycode40=0
Buttoncode40=0
Keycode41=0
Buttoncode41=0
Keycode42=0
Buttoncode42=0
Keycode43=0
Buttoncode43=0
Keycode44=0
Buttoncode44=0
Keycode45=0
Buttoncode45=0
Keycode46=0
Buttoncode46=0
Keycode47=0
Buttoncode47=0
Keycode48=0
Buttoncode48=0
Keycode49=0
Buttoncode49=0
Keycode50=0
Buttoncode50=0
Keycode51=0
Buttoncode51=0
Keycode52=0
Buttoncode52=0
Keycode53=0
Buttoncode53=0
Keycode54=0
Buttoncode54=0
Keycode55=0
Buttoncode55=0
Keycode56=0
Buttoncode56=0
Keycode57=0
Buttoncode57=0
Keycode58=0
Buttoncode58=0
Keycode59=0
Buttoncode59=0
Keycode60=0
Buttoncode60=0
Keycode61=0
Buttoncode61=0
Keycode62=0
Buttoncode62=0
Keycode63=0
Buttoncode63=0
Keycode64=0
Buttoncode64=0
Keycode65=0
Buttoncode65=0
Keycode66=0
Buttoncode66=0
Keycode67=0
Buttoncode67=0
Keycode68=0
Buttoncode68=0
Keycode69=0
Buttoncode69=0
Keycode70=0
Buttoncode70=0
Keycode71=0
Buttoncode71=0
Keycode72=0
Buttoncode72=0
Keycode73=0
Buttoncode73=0
Keycode74=0
Buttoncode74=0
Keycode75=0
Buttoncode75=0
Keycode76=0
Buttoncode76=0
Keycode77=0
Buttoncode77=0
Keycode78=0
Buttoncode78=0
Keycode79=0
Buttoncode79=0
Keycode80=0
Buttoncode80=0
Keycode81=0
Buttoncode81=0
Keycode82=0
Buttoncode82=0
Keycode83=0
Buttoncode83=0
Keycode84=0
Buttoncode84=0
Keycode85=0
Buttoncode85=0
Keycode86=0
Buttoncode86=0
Keycode87=0
Buttoncode87=0
Keycode88=0
Buttoncode88=0
Keycode89=0
Buttoncode89=0
Keycode90=0
Buttoncode90=0
Keycode91=0
Buttoncode91=0
Keycode92=0
Buttoncode92=0
Keycode93=0
Buttoncode93=0
Keycode94=0
Buttoncode94=0
Keycode95=0
Buttoncode95=0
Keycode96=0
Buttoncode96=0
[Inputtriggersettings]
Pin1=0
Port1=0
Buttoncode1=0
Activelow1=False
Pin2=0
Port2=0
Buttoncode2=0
Activelow2=False
Pin3=0
Port3=0
Buttoncode3=0
Activelow3=False
Pin4=0
Port4=0
Buttoncode4=0
Activelow4=False
Pin5=0
Port5=0
Buttoncode5=0
Activelow5=False
Pin6=0
Port6=0
Buttoncode6=0
Activelow6=False
Pin7=0
Port7=0
Buttoncode7=0
Activelow7=False
Pin8=0
Port8=0
Buttoncode8=0
Activelow8=False
Pin9=0
Port9=0
Buttoncode9=0
Activelow9=False
Pin10=0
Port10=0
Buttoncode10=0
Activelow10=False
Pin11=0
Port11=0
Buttoncode11=0
Activelow11=False
Pin12=0
Port12=0
Buttoncode12=0
Activelow12=False
Pin13=0
Port13=0
Buttoncode13=0
Activelow13=False
Pin14=0
Port14=0
Buttoncode14=0
Activelow14=False
Pin15=0
Port15=0
Buttoncode15=0
Activelow15=False
Pin16=0
Port16=0
Buttoncode16=0
Activelow16=False
Pin17=0
Port17=0
Buttoncode17=0
Activelow17=False
Pin18=0
Port18=0
Buttoncode18=0
Activelow18=False
Pin19=0
Port19=0
Buttoncode19=0
Activelow19=False
Pin20=0
Port20=0
Buttoncode20=0
Activelow20=False
Pin21=0
Port21=0
Buttoncode21=0
Activelow21=False
Pin22=0
Port22=0
Buttoncode22=0
Activelow22=False
Pin23=0
Port23=0
Buttoncode23=0
Activelow23=False
Pin24=0
Port24=0
Buttoncode24=0
Activelow24=False
Pin25=0
Port25=0
Buttoncode25=0
Activelow25=False
Pin26=0
Port26=0
Buttoncode26=0
Activelow26=False
Pin27=0
Port27=0
Buttoncode27=0
Activelow27=False
Pin28=0
Port28=0
Buttoncode28=0
Activelow28=False
Pin29=0
Port29=0
Buttoncode29=0
Activelow29=False
Pin30=0
Port30=0
Buttoncode30=0
Activelow30=False
Pin31=0
Port31=0
Buttoncode31=0
Activelow31=False
Pin32=0
Port32=0
Buttoncode32=0
Activelow32=False
Pin33=0
Port33=0
Buttoncode33=0
Activelow33=False
Pin34=0
Port34=0
Buttoncode34=0
Activelow34=False
Pin35=0
Port35=0
Buttoncode35=0
Activelow35=False
Pin36=0
Port36=0
Buttoncode36=0
Activelow36=False
Pin37=0
Port37=0
Buttoncode37=0
Activelow37=False
Pin38=0
Port38=0
Buttoncode38=0
Activelow38=False
Pin39=0
Port39=0
Buttoncode39=0
Activelow39=False
Pin40=0
Port40=0
Buttoncode40=0
Activelow40=False
Pin41=0
Port41=0
Buttoncode41=0
Activelow41=False
Pin42=0
Port42=0
Buttoncode42=0
Activelow42=False
Pin43=0
Port43=0
Buttoncode43=0
Activelow43=False
Pin44=0
Port44=0
Buttoncode44=0
Activelow44=False
Pin45=0
Port45=0
Buttoncode45=0
Activelow45=False
Pin46=0
Port46=0
Buttoncode46=0
Activelow46=False
Pin47=0
Port47=0
Buttoncode47=0
Activelow47=False
Pin48=0
Port48=0
Buttoncode48=0
Activelow48=False
Pin49=0
Port49=0
Buttoncode49=0
Activelow49=False
Pin50=0
Port50=0
Buttoncode50=0
Activelow50=False
Pin51=0
Port51=0
Buttoncode51=0
Activelow51=False
Pin52=0
Port52=0
Buttoncode52=0
Activelow52=False
Pin53=0
Port53=0
Buttoncode53=0
Activelow53=False
Pin54=0
Port54=0
Buttoncode54=0
Activelow54=False
Pin55=0
Port55=0
Buttoncode55=0
Activelow55=False
Pin56=0
Port56=0
Buttoncode56=0
Activelow56=False
Pin57=0
Port57=0
Buttoncode57=0
Activelow57=False
Pin58=0
Port58=0
Buttoncode58=0
Activelow58=False
Pin59=0
Port59=0
Buttoncode59=0
Activelow59=False
Pin60=0
Port60=0
Buttoncode60=0
Activelow60=False
Pin61=0
Port61=0
Buttoncode61=0
Activelow61=False
Pin62=0
Port62=0
Buttoncode62=0
Activelow62=False
Pin63=0
Port63=0
Buttoncode63=0
Activelow63=False
Pin64=0
Port64=0
Buttoncode64=0
Activelow64=False
Pin65=0
Port65=0
Buttoncode65=0
Activelow65=False
Pin66=0
Port66=0
Buttoncode66=0
Activelow66=False
Pin67=0
Port67=0
Buttoncode67=0
Activelow67=False
Pin68=0
Port68=0
Buttoncode68=0
Activelow68=False
Pin69=0
Port69=0
Buttoncode69=0
Activelow69=False
Pin70=0
Port70=0
Buttoncode70=0
Activelow70=False
Pin71=0
Port71=0
Buttoncode71=0
Activelow71=False
Pin72=0
Port72=0
Buttoncode72=0
Activelow72=False
Pin73=0
Port73=0
Buttoncode73=0
Activelow73=False
Pin74=0
Port74=0
Buttoncode74=0
Activelow74=False
Pin75=0
Port75=0
Buttoncode75=0
Activelow75=False
Pin76=0
Port76=0
Buttoncode76=0
Activelow76=False
Pin77=0
Port77=0
Buttoncode77=0
Activelow77=False
Pin78=0
Port78=0
Buttoncode78=0
Activelow78=False
Pin79=0
Port79=0
Buttoncode79=0
Activelow79=False
Pin80=0
Port80=0
Buttoncode80=0
Activelow80=False
Pin81=0
Port81=0
Buttoncode81=0
Activelow81=False
Pin82=0
Port82=0
Buttoncode82=0
Activelow82=False
Pin83=0
Port83=0
Buttoncode83=0
Activelow83=False
Pin84=0
Port84=0
Buttoncode84=0
Activelow84=False
Pin85=0
Port85=0
Buttoncode85=0
Activelow85=False
Pin86=0
Port86=0
Buttoncode86=0
Activelow86=False
Pin87=0
Port87=0
Buttoncode87=0
Activelow87=False
Pin88=0
Port88=0
Buttoncode88=0
Activelow88=False
Pin89=0
Port89=0
Buttoncode89=0
Activelow89=False
Pin90=0
Port90=0
Buttoncode90=0
Activelow90=False
Pin91=0
Port91=0
Buttoncode91=0
Activelow91=False
Pin92=0
Port92=0
Buttoncode92=0
Activelow92=False
Pin93=0
Port93=0
Buttoncode93=0
Activelow93=False
Pin94=0
Port94=0
Buttoncode94=0
Activelow94=False
Pin95=0
Port95=0
Buttoncode95=0
Activelow95=False
Pin96=0
Port96=0
Buttoncode96=0
Activelow96=False
[Outputtriggersettings]
Pin1=17
Port1=4
LEDcode1=119
Invert1=False
Pin2=0
Port2=0
LEDcode2=0
Invert2=False
Pin3=0
Port3=0
LEDcode3=0
Invert3=False
Pin4=0
Port4=0
LEDcode4=0
Invert4=False
Pin5=0
Port5=0
LEDcode5=0
Invert5=False
Pin6=0
Port6=0
LEDcode6=0
Invert6=False
Pin7=0
Port7=0
LEDcode7=0
Invert7=False
Pin8=0
Port8=0
LEDcode8=0
Invert8=False
Pin9=0
Port9=0
LEDcode9=0
Invert9=False
Pin10=0
Port10=0
LEDcode10=0
Invert10=False
Pin11=0
Port11=0
LEDcode11=0
Invert11=False
Pin12=0
Port12=0
LEDcode12=0
Invert12=False
Pin13=0
Port13=0
LEDcode13=0
Invert13=False
Pin14=0
Port14=0
LEDcode14=0
Invert14=False
Pin15=0
Port15=0
LEDcode15=0
Invert15=False
Pin16=0
Port16=0
LEDcode16=0
Invert16=False
Pin17=0
Port17=0
LEDcode17=0
Invert17=False
Pin18=0
Port18=0
LEDcode18=0
Invert18=False
Pin19=0
Port19=0
LEDcode19=0
Invert19=False
Pin20=0
Port20=0
LEDcode20=0
Invert20=False
Pin21=0
Port21=0
LEDcode21=0
Invert21=False
Pin22=0
Port22=0
LEDcode22=0
Invert22=False
Pin23=0
Port23=0
LEDcode23=0
Invert23=False
Pin24=0
Port24=0
LEDcode24=0
Invert24=False
Pin25=0
Port25=0
LEDcode25=0
Invert25=False
Pin26=0
Port26=0
LEDcode26=0
Invert26=False
Pin27=0
Port27=0
LEDcode27=0
Invert27=False
Pin28=0
Port28=0
LEDcode28=0
Invert28=False
Pin29=0
Port29=0
LEDcode29=0
Invert29=False
Pin30=0
Port30=0
LEDcode30=0
Invert30=False
Pin31=0
Port31=0
LEDcode31=0
Invert31=False
Pin32=0
Port32=0
LEDcode32=0
Invert32=False
Pin33=0
Port33=0
LEDcode33=0
Invert33=False
Pin34=0
Port34=0
LEDcode34=0
Invert34=False
Pin35=0
Port35=0
LEDcode35=0
Invert35=False
Pin36=0
Port36=0
LEDcode36=0
Invert36=False
Pin37=0
Port37=0
LEDcode37=0
Invert37=False
Pin38=0
Port38=0
LEDcode38=0
Invert38=False
Pin39=0
Port39=0
LEDcode39=0
Invert39=False
Pin40=0
Port40=0
LEDcode40=0
Invert40=False
Pin41=0
Port41=0
LEDcode41=0
Invert41=False
Pin42=0
Port42=0
LEDcode42=0
Invert42=False
Pin43=0
Port43=0
LEDcode43=0
Invert43=False
Pin44=0
Port44=0
LEDcode44=0
Invert44=False
Pin45=0
Port45=0
LEDcode45=0
Invert45=False
Pin46=0
Port46=0
LEDcode46=0
Invert46=False
Pin47=0
Port47=0
LEDcode47=0
Invert47=False
Pin48=0
Port48=0
LEDcode48=0
Invert48=False
Pin49=0
Port49=0
LEDcode49=0
Invert49=False
Pin50=0
Port50=0
LEDcode50=0
Invert50=False
Pin51=0
Port51=0
LEDcode51=0
Invert51=False
Pin52=0
Port52=0
LEDcode52=0
Invert52=False
Pin53=0
Port53=0
LEDcode53=0
Invert53=False
Pin54=0
Port54=0
LEDcode54=0
Invert54=False
Pin55=0
Port55=0
LEDcode55=0
Invert55=False
Pin56=0
Port56=0
LEDcode56=0
Invert56=False
Pin57=0
Port57=0
LEDcode57=0
Invert57=False
Pin58=0
Port58=0
LEDcode58=0
Invert58=False
Pin59=0
Port59=0
LEDcode59=0
Invert59=False
Pin60=0
Port60=0
LEDcode60=0
Invert60=False
Pin61=0
Port61=0
LEDcode61=0
Invert61=False
Pin62=0
Port62=0
LEDcode62=0
Invert62=False
Pin63=0
Port63=0
LEDcode63=0
Invert63=False
Pin64=0
Port64=0
LEDcode64=0
Invert64=False
Pin65=0
Port65=0
LEDcode65=0
Invert65=False
Pin66=0
Port66=0
LEDcode66=0
Invert66=False
Pin67=0
Port67=0
LEDcode67=0
Invert67=False
Pin68=0
Port68=0
LEDcode68=0
Invert68=False
Pin69=0
Port69=0
LEDcode69=0
Invert69=False
Pin70=0
Port70=0
LEDcode70=0
Invert70=False
Pin71=0
Port71=0
LEDcode71=0
Invert71=False
Pin72=0
Port72=0
LEDcode72=0
Invert72=False
Pin73=0
Port73=0
LEDcode73=0
Invert73=False
Pin74=0
Port74=0
LEDcode74=0
Invert74=False
Pin75=0
Port75=0
LEDcode75=0
Invert75=False
Pin76=0
Port76=0
LEDcode76=0
Invert76=False
Pin77=0
Port77=0
LEDcode77=0
Invert77=False
Pin78=0
Port78=0
LEDcode78=0
Invert78=False
Pin79=0
Port79=0
LEDcode79=0
Invert79=False
Pin80=0
Port80=0
LEDcode80=0
Invert80=False
Pin81=0
Port81=0
LEDcode81=0
Invert81=False
Pin82=0
Port82=0
LEDcode82=0
Invert82=False
Pin83=0
Port83=0
LEDcode83=0
Invert83=False
Pin84=0
Port84=0
LEDcode84=0
Invert84=False
Pin85=0
Port85=0
LEDcode85=0
Invert85=False
Pin86=0
Port86=0
LEDcode86=0
Invert86=False
Pin87=0
Port87=0
LEDcode87=0
Invert87=False
Pin88=0
Port88=0
LEDcode88=0
Invert88=False
Pin89=0
Port89=0
LEDcode89=0
Invert89=False
Pin90=0
Port90=0
LEDcode90=0
Invert90=False
Pin91=0
Port91=0
LEDcode91=0
Invert91=False
Pin92=0
Port92=0
LEDcode92=0
Invert92=False
Pin93=0
Port93=0
LEDcode93=0
Invert93=False
Pin94=0
Port94=0
LEDcode94=0
Invert94=False
Pin95=0
Port95=0
LEDcode95=0
Invert95=False
Pin96=0
Port96=0
LEDcode96=0
Invert96=False
[CAMsettings]
Tooldia=6
Startdepth=0
Cutdepth=-1
Cutperpass=1
SafeZ=25
Feedrate=1000
Tooloverlap=50
Plungerate=400
Spindlespeed=5000
Arctolerance=0.01
[Laserengraveplugin]
workpiecewidth=50
workpieceheight=50
keepaspectratio=True
Yscandistance=0.2
Feedrate=1000
Originsetting=7
[Plugins_enabled]
Debugger.dll=False
Diagnostics.dll=False
Laserengrave.dll=False
Plugintest.dll=False
Webcamera.dll=False
Printer3D.dll=False
UCR200Plugin.dll=False
Xbox360controller.dll=False
Scope.dll=False
AutoBackupProfile.dll=False
AutoLevelerCA.dll=False
C76 Fault Reporting.dll=True
Console.dll=False
FaultSignals.dll=False
Lubricator.dll=False
Modbusmaster.dll=False
Pinout.dll=False
Probing.dll=False
RapidChangeATC.dll=True
RapidChangePlugin.dll=False
UCCNC_OSK.dll=False
UCR201Plugin.dll=False
XHC-HB04_pendant.dll=False
[Plugins_callstartup]
Debugger.dll=False
Diagnostics.dll=False
Laserengrave.dll=False
Plugintest.dll=False
Webcamera.dll=False
Printer3D.dll=False
UCR200Plugin.dll=False
Xbox360controller.dll=False
Scope.dll=False
AutoBackupProfile.dll=False
AutoLevelerCA.dll=False
C76 Fault Reporting.dll=False
Console.dll=False
FaultSignals.dll=False
Lubricator.dll=False
Modbusmaster.dll=False
Pinout.dll=False
Probing.dll=False
RapidChangeATC.dll=False
RapidChangePlugin.dll=False
UCCNC_OSK.dll=False
UCR201Plugin.dll=False
XHC-HB04_pendant.dll=False
[Macroloops]
Macroloopautorun0=False
Macroloopnumber0=0
Macroloopautorun1=False
Macroloopnumber1=0
Macroloopautorun2=False
Macroloopnumber2=0
Macroloopautorun3=False
Macroloopnumber3=0
Macroloopautorun4=False
Macroloopnumber4=0
Macroloopautorun5=False
Macroloopnumber5=0
Macroloopautorun6=False
Macroloopnumber6=0
Macroloopautorun7=False
Macroloopnumber7=0
Macroloopautorun8=False
Macroloopnumber8=0
Macroloopautorun9=False
Macroloopnumber9=0
Macroloopautorun10=False
Macroloopnumber10=0
Macroloopautorun11=False
Macroloopnumber11=0
Macroloopautorun12=False
Macroloopnumber12=0
Macroloopautorun13=False
Macroloopnumber13=0
Macroloopautorun14=False
Macroloopnumber14=0
Macroloopautorun15=False
Macroloopnumber15=0
Macroloopautorun16=False
Macroloopnumber16=0
Macroloopautorun17=False
Macroloopnumber17=0
Macroloopautorun18=False
Macroloopnumber18=0
Macroloopautorun19=False
Macroloopnumber19=0
Macroloopautorun20=False
Macroloopnumber20=0
Macroloopautorun21=False
Macroloopnumber21=0
Macroloopautorun22=False
Macroloopnumber22=0
Macroloopautorun23=False
Macroloopnumber23=0
Macroloopautorun24=False
Macroloopnumber24=0
Macroloopautorun25=False
Macroloopnumber25=0
Macroloopautorun26=False
Macroloopnumber26=0
Macroloopautorun27=False
Macroloopnumber27=0
Macroloopautorun28=False
Macroloopnumber28=0
Macroloopautorun29=False
Macroloopnumber29=0
Macroloopautorun30=False
Macroloopnumber30=0
Macroloopautorun31=False
Macroloopnumber31=0
Macroloopautorun32=False
Macroloopnumber32=0
Macroloopautorun33=False
Macroloopnumber33=0
Macroloopautorun34=False
Macroloopnumber34=0
Macroloopautorun35=False
Macroloopnumber35=0
Macroloopautorun36=False
Macroloopnumber36=0
Macroloopautorun37=False
Macroloopnumber37=0
Macroloopautorun38=False
Macroloopnumber38=0
Macroloopautorun39=False
Macroloopnumber39=0
Macroloopautorun40=False
Macroloopnumber40=0
Macroloopautorun41=False
Macroloopnumber41=0
Macroloopautorun42=False
Macroloopnumber42=0
Macroloopautorun43=False
Macroloopnumber43=0
Macroloopautorun44=False
Macroloopnumber44=0
Macroloopautorun45=False
Macroloopnumber45=0
Macroloopautorun46=False
Macroloopnumber46=0
Macroloopautorun47=False
Macroloopnumber47=0
[SpindlePIDsettings]
PIDenable=False
Kp=1
Kd=0
Ki=0.01
Samplingtime=10
[AUXencodersettings]
AUXencoder1pinA=0
AUXencoder1portA=0
AUXencoder1pinB=0
AUXencoder1portB=0
AUXencoder2pinA=0
AUXencoder2portA=0
AUXencoder2pinB=0
AUXencoder2portB=0
AUXencoder3pinA=0
AUXencoder3portA=0
AUXencoder3pinB=0
AUXencoder3portB=0
AUXencoder4pinA=0
AUXencoder4portA=0
AUXencoder4pinB=0
AUXencoder4portB=0
AUXencoder5pinA=0
AUXencoder5portA=0
AUXencoder5pinB=0
AUXencoder5portB=0
AUXencoder6pinA=0
AUXencoder6portA=0
AUXencoder6pinB=0
AUXencoder6portB=0
Aux1Encodercountsper=1E-07
Aux2Encodercountsper=1E-07
Aux3Encodercountsper=1E-07
Aux4Encodercountsper=1E-07
Aux5Encodercountsper=1E-07
Aux6Encodercountsper=1E-07
[Digitizesettings]
Addaxisnames=False
Xinclude=True
Yinclude=True
Zinclude=True
Ainclude=False
Binclude=False
Cinclude=False
Commaseparation=False
Filenametosave=C:\UCCNC\Example_codes\Digitize.txt
Numberofdigits=4
Probedia=0
Clearfilenamewhenfinished=False
[Statistics]
TotalM3s=330
TotalM4s=147
TotalM7s=222
TotalM8s=0
Totaltimedays=3
Totaltimehours=4
Totaltimeminutes=54
Totaltimeseconds=58
M3timedays=0
M3timehours=5
M3timeminutes=25
M3timeseconds=19
M4timedays=0
M4timehours=0
M4timeminutes=13
M4timeseconds=24
Cyclestimedays=0
Cyclestimehours=4
Cyclestimeminutes=8
Cyclestimeseconds=21
TotaldistX=60765
TotalcutX=15486
TotaldistY=28642
TotalcutY=9946
TotaldistZ=7331
TotalcutZ=4219
TotaldistA=0
TotalcutA=0
TotaldistB=0
TotalcutB=0
TotaldistC=0
TotalcutC=0
UCdevicetype=Demo_UC300ETH_M45
Softwareversion=1.2113
[JogSpeed]
913=100
[RFHsettings]
Switchspindlemode=1
Doinitialmoveswithrapid=False
[RapidChange]
activeConfig=BHD2
pocketOffset=1.770
alignment=X
direction=1
pockets=5
loadrpm=1000.0
unloadrpm=1200.0
fEngage=50.0
xManual=65.000
yManual=5.000
xPocket1=86.873
yPocket1=-1.840
zEngage=-4.177
zRetreat=-3.705
zSafeClear=-0.100
zSafeSet=-0.100
zSafeLoad=-2.000
zSpinStart=-3.271
setterInternal=true
setterEnabled=true
coverControl=output
xSetter=95.665
ySetter=-1.832
zSeek=-0.100
seekTarget=-6.285
fSeek=50.0
fSet=10.0
seekRetreat=0.250
coverAxis=A
coverOpen=1.299
coverClosed=0.000
coverWait=1000
coverLed=109
coverPort=4
coverPin=7
coverTimedSafe=true
recEnabled=true
irBrokenActive=false
recLed=74
recPort=2
recPin=6
zZone1=-2.839
zZone2=-2.643
afterEnabled=true
beforeEnabled=true
preMacro=2710
postMacro=2712
touchOffMacro=931
mClose=999
mOpen=998
mSetCurrent=61
mCloseSet=true
mOpenSet=true
mSetCurrentSet=true
m6Set=true
mSetTLOSet=true
mTLOOverride=false
profileUnits=in
[Profile:BHD2_RapidChange]
pocketOffset=2.500
alignment=X
direction=1
xPocket1=0.000
yPocket1=0.000
zEngage=0.000
zSafeLoad=0.000
zSafeClear=0.000
fEngage=0
loadrpm=0
unloadrpm=0
setterEnabled=false
xSetter=0.000
ySetter=0.000
zSeek=0.000
zSafeSet=0.000
setterOffset=0.000
fSeek=0
seekRetreat=0.000
fSet=0
seekMax=0
recEnabled=false
zZone1=0.000
zZone2=0.000
recPort=0
recPin=0
coverControl=false
coverAxis=A
coverOpen=0.000
coverClosed=0.000
coverPort=0
coverPin=0
unitMultiplier=1
pockets=0
coverTimedSafe=true
[Probing]
Mode=1
Tool=1,Z,0
Simple=X,0
Angle=X,0,X,0
Pocket=X,0
Outer=X,0,X,0
InnerCorner=1,X,0,X,0
OuterCorner=1,X,0,X,0
RectInner=X,0,X,0
CircleInner=X,0,X,0
RectOuter=X,0,X,0,X,0
CircleOuter=X,0,X,0,X,0
Common=X,0,X,0,X,0
GageHeight=0
FineDistance=0.0001
Retract=0
FastFeed=0.001
FineFeed=0.001
ZeroProbedAxis=False
ZeroOnAllOffsets=False
SingleProbeMode=False
EnableRetract=False
PauseBeforeProbe=False
CommonAxisSettings=False
Axis1CountGage=False
Axis1CountDia=False
Axis2CountGage=False
Axis2CountDia=False
SafeX=0
SafeY=0
SafeZ=0
SafeXPositive=False
SafeYPositive=False
SafeZPositive=False
SaveMobileProbePos=False
SaveWpReferences=False
OverrideProbeDia=False
ProbeDiameterOvr=0
ReferenceToolNumber=0
FixedProbePos=False,-1,True,0,True,0,True,0,False,0,False,0,False,0,0,False,0
ManualProbeMode=False
Set_ToolProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_SimpleProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_AngleProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_PocketProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_OuterProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_InnerCornerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_OuterCornerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_RectInnerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_CircleInnerProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_RectOuterProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
Set_CircleOuterProbe=0,0,0,0,0,False,False,False,False,False,False,False,False,False,False
LimitTraverseSpeed=False
TraverseSpeedLimit=0.001
Blower=1,0,1
BlowerPort=0
BlowerPin=0
BlowerActiveLow=False
SeparateSettingsPerMode=False

[ger21]

They should be in the ".pro" file, so post here the content of the .pro profile file.

What I meant was, how is it getting written to the profile? Where is the value being generated?

This value is being used to set the tool length offset.

Code: Select all

exec.Code("G53 G0 Z" + zSafeToolSetter);
exec.Code("G53 G0 X" + xToolSetter + "Y" + yToolSetter);
exec.Code("G53 G0 Z" + zSeekStart);
exec.Code("G31 Z" + zTargetWork + " F" + seekFeedRate);
WaitForMove();
exec.Wait(200);

double retreatDistance = double.Parse(seekRetreat);
double retreatHeight = exec.GetZmachpos() + retreatDistance;
exec.Code("G53 G0 Z" + retreatHeight.ToString());
exec.Code("G31 Z" + zTargetWork + " F" + setFeedRate);
WaitForMove();
exec.Wait(200);

double offset = exec.GetZmachpos() - tloReference;
int fieldNum = GetToolOffsetFieldNumber(tool);
AS3.Setfield(offset, fieldNum);
exec.Callbutton(saveToolTableButtonId);
exec.Wait(200);
exec.Code("G43 H" + tool.ToString());

And unless I'm missing something, he's probing, but never using the probe trip point.
So to me, it looks like he's probing, but not using the results, then setting the tool length to a fixed value that doesn't get updated, making all the tool lengths the same?

Also, you need to use Validatefield after Setfield.

This:

Code: Select all

AS3.Setfield(offset, fieldNum);

Should be this:

Code: Select all

AS3.Setfield(offset, fieldNum);
AS3.Validatefield(fieldNum);

[bhdavis]

Thanks Gerry. I won't get a chance to work on this for a few days but will report back on what I can accomplish.

BH

[RsX]

tloReference doesn't seem to be defined in the profile.
It is always 0 and the macro is using only the machine cordinate (from the home switch) to set the tool

[bhdavis]

Thank you everybody for taking the time to analyze the situation and supply some guidance.

After a stretch of using the CNC a lot I've got other things to do for the typical end of winter/start of spring change over around the house. There are no pressing CNC projects right now so I'm going to let it sit for a bit and get other things done. One would think retirement would have fewer demands..........LOL !!!

I will get back to working on this tool measure issue when other things are more caught up. In the mean time I want to again express my appreciation to everyone who has posted here. I will use all this information in trying to get my tool measuring working as it should.

BH

[heffer86]

I know it doesn't solve your issue buy I have been using RapidChange ATC for almost two years now. I have had no issues with the M931, M31 or M6 macros performing erratically. Let me know if you need something tested on another machine and magazine.

[bhdavis]

I know it doesn't solve your issue buy I have been using RapidChange ATC for almost two years now. I have had no issues with the M931, M31 or M6 macros performing erratically. Let me know if you need something tested on another machine and magazine.

Wow.......that is extraordinarily generous. I really appreciate the offer.

I've uploaded the 3 files to my website where you can get them. Go to:

https://www.bhdavis.net/downloads/CNC/


I can't get back to this for a few weeks now (working on another large project) so no rush. But being able to confirm if it's my macros causing the problem is a great thing.

As I'm sure you know just be aware that my pickup locations etc. will be different from yours. If it looks too risky please don't proceed.

Plus look them over as I have made some other custom modifications for my specific needs. Go slowly and cautiously if you decide to run them.

Thanks,
BH Davis