Laser Question

Post anything you want to discuss with others about the software.

Re: Laser Question

Postby Vmax549 » Sat Nov 21, 2020 5:26 pm

Check teh setting for :
M3 dwell after off
dwell = MS or sec

Just a thought, (;-) TP
Vmax549
 
Posts: 286
Joined: Sun Nov 22, 2015 3:25 am
Location: USA

Re: Laser Question

Postby naijin » Sun Nov 22, 2020 3:17 am

Default.pro
my current profile
(35.83 KiB) Downloaded 4 times
Hi Dezsoe here is my profile:
naijin
 
Posts: 80
Joined: Mon Dec 04, 2017 11:24 pm

Re: Laser Question

Postby dezsoe » Sun Nov 22, 2020 9:17 am

Hi Nick,

As I thought, the M3 settings are joking you.

najin.png

You have the spindle PWM on the same pin as the laser. Set the spindle PWM output to port 0, pin 0.

Also, the output triggers are strange on pin 2 and 3.
dezsoe
 
Posts: 1219
Joined: Sun Mar 12, 2017 4:41 pm
Location: Csörög, Hungary

Re: Laser Question

Postby naijin » Sun Nov 22, 2020 10:50 pm

Dezsoe.. Your are a Legend!! A super Hero, thanks you for your help.. every thing is working fine now. :D :D

Cheers Nick
naijin
 
Posts: 80
Joined: Mon Dec 04, 2017 11:24 pm

Previous

Return to General discussion about the UCCNC software

Who is online

Users browsing this forum: Bing [Bot] and 5 guests

cron