UC400ETH with Mach3 Turn profile

This Section is for users to discuss hardware

UC400ETH with Mach3 Turn profile

Postby CyclopsNC » Thu Oct 18, 2018 3:08 am

For some reason UC400ETH doesnt work with the Mach3 default Turn profile although it does work with the Mill profile. I guess its nothing to do with the profiles but just changing the settings in the "Ports and Pins" dialog should get it to work.
Unless I'm wrong, Is this by design or I just have to run through the settings and UC400ETH should work anyway with the turn profile.
I have checked the settings in the Ports and Pins for the turn profile and don't seem to be doing much wrong over there.
CyclopsNC
 
Posts: 14
Joined: Fri Jun 29, 2018 1:41 pm

Re: UC400ETH with Mach3 Turn profile

Postby cncdrive » Thu Oct 18, 2018 4:36 am

It should work the same with the Mill and the Turn profiles.
cncdrive
Site Admin
 
Posts: 4695
Joined: Tue Aug 12, 2014 11:17 pm

Re: UC400ETH with Mach3 Turn profile

Postby asuratman » Fri Dec 21, 2018 3:10 am

How can we use mach3 turn profile on uccnc ? So, we can use this to run lathe. Let me know.
asuratman
 
Posts: 118
Joined: Sun Jan 28, 2018 1:50 pm

Re: UC400ETH with Mach3 Turn profile

Postby ger21 » Fri Dec 21, 2018 11:44 am

CyclopsNC wrote:For some reason UC400ETH doesnt work with the Mach3 default Turn profile although it does work with the Mill profile.


Try creating a new profile from scratch. Mach3 .xml files often become corrupt and no longer work properly.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2663
Joined: Sat Sep 03, 2016 2:17 am

Re: UC400ETH with Mach3 Turn profile

Postby Robertspark » Fri Dec 21, 2018 12:08 pm

It is not possible to use a Mach3 PROFILE on uccnc.

Cncdrive do have mach3 plugins for all of their motion controllers so you can run mach3 with uc100, uc300 and uc400eth motion controllers

Mach3 and uccnc are totally different
Robertspark
 
Posts: 1892
Joined: Sat Sep 03, 2016 4:27 pm


Return to Hardware

Who is online

Users browsing this forum: No registered users and 7 guests