Macro_capability_detailed.htm - suggested corrections

[cncdrive]

Thanks Rob, I appritiate the update!

[Robertspark]

UCCNC Macro Manual has been updated to the current development release v1.2105

Available for download from googledrive here {or via my signature}:

https://drive.google.com/drive/folders/ ... kdfQWRaYTg

[Robertspark]

UCCNC Macro Manual has been updated to the current development release v1.2108

Available for download from googledrive here {or via my signature}:

https://drive.google.com/file/d/1weOpLj ... sp=sharing

I may do a tidy up update as there are a few methods I'd like to explain better + tidy up formatting

{useful} Comments / additions welcome .... the manual is afterall to benefit you and everyone else.... if there is something missing / something you use and would like added just PM me / post here..... it is suppose to be a central searchable source of info for macros (and to a degree plugins..... No I'm not very good with plugins .... too many things in my head to concentrate on one programming language

[beefy]

Thanks for the update Rob.

[extent]

The Addslider() example parameters is just a copy of the addMDI params

[Robertspark]

The Addslider() example parameters is just a copy of the addMDI params

Damn... I'd seen that and forgot to change it (did some last night... Some this morning..... There is 22300 words in that manual now though.

I'll sort in the update... Thanks for the heads up

[Robertspark]

V1.2109 Macro_capability_detailed.htm typographical errors:

Function: void GetRotate(out double Rx, out double Ry, out double Angle)
Description: This function returns the current G68 rotation point and rotation angle.
Example: double Rx, Ry, Angle;
GetRotate(out Rx, out Ry, out Angle);

suggest correct to:

Function: void GetRotate(out double Rx, out double Ry, out double Angle)
Description: This function returns the current G68 rotation point and rotation angle.
Example: double Rx, Ry, Angle;
exec.GetRotate(out Rx, out Ry, out Angle);

________________________________________________________________________

Function: int Getcurrentgcodelinenumber(void)
Description: This function returns the line number of the g-code file pointed by the current line DRO pointer.
Example: int linenumber = exec.Getcurrgcodelinetext();

suggest correct to:

Function: int Getcurrentgcodelinenumber(void)
Description: This function returns the line number of the g-code file pointed by the current line DRO pointer.
Example: int linenumber = exec.Getcurrentgcodelinenumber();

___________________________________________________________________

Suggested add to Macro_capability_detailed.htm

AddStatusmessage()
Function: void AddStatusmessage( string StatusMessage )
Description: Adds a message to the Status Listbox
Example: exec.AddStatusmessage( "Check Ohmic Probe");

[cncdrive]

Hi Rob,

Thank you for the suggestions, I've just made the corrections and addition.

[Robertspark]

UCCNC Macro Manual Updated to the current development UCCNC version 1.2110

https://drive.google.com/file/d/1TDbvMv ... sp=sharing

comments welcome

[cncdrive]

Thank you Rob.