limit and homing switches

This is the place to talk about and share things related to CNC plasma machines using UCCNC

limit and homing switches

Postby Healinhand » Tue Aug 09, 2022 11:50 pm

I built my cnc plasma table using the AXBB-e controller. I used proximity switches for limit switches in series. My question is; can they double as homing switches?
Healinhand
 
Posts: 9
Joined: Wed Oct 31, 2018 1:03 am

Re: limit and homing switches

Postby ger21 » Wed Aug 10, 2022 10:37 am

Yes, just enter the same port and pin number for the home switch inputs.
Gerry
UCCNC 2022 Screenset - http://www.thecncwoodworker.com/2022.html
ger21
 
Posts: 2444
Joined: Sat Sep 03, 2016 2:17 am

Re: limit and homing switches

Postby Healinhand » Wed Aug 10, 2022 9:34 pm

Worked perfectly.
Thanks
Healinhand
 
Posts: 9
Joined: Wed Oct 31, 2018 1:03 am


Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 1 guest