wiring axbb-e with Proma THC 150

This is the place to talk about and share things related to CNC plasma machines using UCCNC

wiring axbb-e with Proma THC 150

Postby cncrail » Mon Jan 18, 2021 3:20 pm

Hello everyone . I just bought AXBB-E, I would like to have the wiring diagram between this and the THC 150 from Proma which is in my possession.. Grazie

Antonino Bortiglio
cncrail
 
Posts: 6
Joined: Sat Jan 16, 2021 3:35 pm

Re: wiring axbb-e with Proma THC 150

Postby cncrail » Mon Jan 18, 2021 8:20 pm

software : UCCNC CNCDRIVE control software for USB and ETH controls

Valid alternative to Mach3, the software works only together with the usb or ethernet controls UC100, UC300, UC300ETH, UC400ETH, AXBB-E, natively supports the THC of Proma, imports the mach3 configuration files (profiles) i bought for this reason!!!
cncrail
 
Posts: 6
Joined: Sat Jan 16, 2021 3:35 pm

Re: wiring axbb-e with Proma THC 150

Postby cncdrive » Mon Jan 18, 2021 10:06 pm

The proma THC150 outputs 3 signals, ArcOK, THCup and THCdown.
You can connect the signals to any inputs of the AXBB-E, then you just have to configure these functions to the inputs as per your connections.
cncdrive
Site Admin
 
Posts: 3696
Joined: Tue Aug 12, 2014 11:17 pm

Re: wiring axbb-e with Proma THC 150

Postby cncrail » Tue Jan 19, 2021 7:33 am

hello thanks for the answer can i configure with mach3?
cncrail
 
Posts: 6
Joined: Sat Jan 16, 2021 3:35 pm

Re: wiring axbb-e with Proma THC 150

Postby cncdrive » Tue Jan 19, 2021 6:13 pm

Yes, it works with mach3 too.
cncdrive
Site Admin
 
Posts: 3696
Joined: Tue Aug 12, 2014 11:17 pm

Re: wiring axbb-e with Proma THC 150

Postby cncrail » Wed Jan 20, 2021 9:54 am

ma posso portare la stessa configurazione in UCCNC dal mach3
cncrail
 
Posts: 6
Joined: Sat Jan 16, 2021 3:35 pm


Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 3 guests