Return to part zero after cut

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Re: Return to part zero after cut

Postby Skrotskalle » Tue Jan 05, 2021 5:57 pm

The problem is that it returns to home position/machine zero after the cut.
The M25100 macro should not be there, I had that macro on my previous setup before I changed to Neuron Lite. But it should not any effect on this problem. I will turn it off anyway.
I work abroard and have my plasma table in my shop back home and as I am now back on work now, I do not have access to it right now. And with this covid crap I do not know when I will be back, so it will be some time before I can do any more troubleshooting/testing. But I will increasing the microstepping a bit.
I will email you when I am back home again.
Marcus
Skrotskalle
 
Posts: 6
Joined: Wed Dec 30, 2020 5:46 pm

Re: Return to part zero after cut

Postby Blackslacks » Mon Mar 01, 2021 1:43 pm

Sheetcam - Options - Job Options - Parking
Blackslacks
 
Posts: 8
Joined: Mon Jul 20, 2020 5:29 pm

Previous

Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 1 guest