Plasma Marking / Engraving

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Plasma Marking / Engraving

Postby Robertspark » Sat Oct 29, 2016 7:26 am

Bit off uccnc topic....

Whilst on my travels of finding feedrates and inverter igbt frequencies in the hyperthem operator and service manuals, I came across their newest offering manuals for the pmx45xp

I noticed they have a section on plasma Marking / engraving with suggested feedrates and settings.

Thought this may be of use to some of the forum readers for ideas in this aspect for your setup.

I've only used the centre punch (drill point marking) routine before but thought this info may be useful too for another tool setup in sheetcam.
Einstein ― “If you can't explain it to a six year old, you don't understand it yourself”
...working my way through the 1000+ ways things don't work to find the one that does
UC400eth, UC300eth, UCCNC v1.2108, Neuron Lite
UCCNC v1.2108 Macro Manual
Posts: 1195
Joined: Sat Sep 03, 2016 4:27 pm
Location: Nr Liverpool, England

Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 1 guest