Delay before piercing

This is the place to talk about and share things related to CNC plasma machines using UCCNC

Re: Delay before piercing

Postby Rad » Mon Feb 19, 2018 3:00 am

(G28.1)

N0100 G00 Z0.7500
N0110 X1.2448 Y2.9995
N0120 Z0.1500
N0130 G28.1 Z0.12
N0140 G92 Z0.0
N0150 G00 Z0.0800
N0160 G92 Z0.0
N0170 G00 Z0.1500
N0180 M03
Rad
 
Posts: 14
Joined: Fri Sep 15, 2017 12:10 pm

Re: Delay before piercing

Postby Rad » Mon Feb 19, 2018 3:14 am

Timed the delay to be around 3sec
Rad
 
Posts: 14
Joined: Fri Sep 15, 2017 12:10 pm

Re: Delay before piercing

Postby cncdrive » Mon Feb 19, 2018 3:33 am

OK, I ran your code with some random settings using a UC100 and the G28.1 in your code take around 0.5seconds at me.
The G28.1 is not a fast code though, it is to home the machine, so software has to syncronise a few times with the motion controller.
However the 3sec still sounds like a lot, much more than what I see.

Can you post your .pro profile file to let me test it also using your settings?

And the same time I advice you to use the G31 instead of the G28.1, that code is for probing and it works much faster.
cncdrive
Site Admin
 
Posts: 2260
Joined: Tue Aug 12, 2014 11:17 pm

Re: Delay before piercing

Postby asuratman » Thu Feb 22, 2018 3:47 am

Do you guys use ohmic sensing to touch plate then go to piercing height ? Is it possible using ohmic sensing on oxy torch to touch steel plate then go to piercing height ?
asuratman
 
Posts: 33
Joined: Sun Jan 28, 2018 1:50 pm

Previous

Return to CNC Plasma

Who is online

Users browsing this forum: No registered users and 2 guests